Cisco 640-816 덤프

저희가 알아본 데 의하면 많은it인사들이Cisco인증640-816시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 ITExamDump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 ITExamDump에는Cisco인증640-816테스트버전과Cisco인증640-816문제와 답 두 가지 버전이 있습니다.우리는 여러분의Cisco인증640-816시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.

ITExamDump의 연구팀에서는Cisco 640-816인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Cisco 640-816덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Cisco 640-816이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Cisco 640-816시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

ITExamDump를 선택함으로 여러분은 Cisco 인증640-816시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 Cisco 인증640-816시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는Cisco 인증640-816덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며Cisco 인증640-816시험을 한번에 패스하도록 도와드립니다.

ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Cisco인증 640-816시험을 등록하신 분들은 바로ITExamDump의Cisco인증 640-816덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.

Cisco 인증 640-816시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Cisco 인증 640-816시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Cisco 인증 640-816시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.

지금 같은 상황에서 몇년간Cisco 640-816시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Cisco 640-816시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의640-816시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은640-816시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

시험 번호/코드: 640-816

시험 이름: Cisco (Interconnecting Cisco Networking Devices Part 2)

ITExamDump는 여러 it인증에 관심 있고 또 응시하고 싶으신 분들에게 편리를 드립니다. 그리고 많은 분들이 이미 ITExamDump제공하는 덤프로 it인증시험을 한번에 패스를 하였습니다. 즉 우리 ITExamDump 덤프들은 아주 믿음이 가는 보장되는 덤프들이란 말이죠. ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Cisco인증640-816시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Cisco인증640-816시험에 많은 도움이640-816될 것입니다. ITExamDump 가 제공하는640-816테스트버전과 문제집은 모두640-816인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에640-816시험을 패스하실 수 있습니다.

640-816 덤프무료샘플다운로드하기: http://www.itexamdump.com/640-816.html

NO.1 Why has this switch not been elected the root bridge for VLAN1?
A. It has more than one interface that is connected to the root network segment.
B. It is running RSTP while the elected root bridge is running 802.1d spanning tree.
C. It has a higher MAC address than the elected root bridge.
D. It has a higher bridge ID than the elected root bridge.
Answer: D

Cisco   640-816 dump   640-816   640-816   640-816

NO.2 A network administrator needs to configure port security on a switch.
Which two statements are true? (Choose two.)
A. The network administrator can apply port security to dynamic access ports.
B. The network administrator can apply port security to EtherChannels.
C. When dynamic MAC address learning is enabled on an interface, the switch can learn new addresses,
up to the maximum defined.
D. The sticky learning feature allows the addition of dynamically learned addresses to the running
configuration.
E. The network administrator can configure static secure or sticky secure MAC addresses in the voice
VLAN.
Answer: CD

Cisco최신덤프   640-816 dump   640-816 pdf

NO.3 What are three characteristics of the OSPF routing protocol? (Choose three.)
A. It converges quickly.
B. OSPF is a classful routing protocol.
C. It uses cost to determine the best route.
D. It uses the DUAL algorithm to determine the best route.
E. OSPF routers send the complete routing table to all directly attached routers.
F. OSPF routers discover neighbors before exchanging routing information.
Answer: ACF

Cisco   640-816   640-816   640-816

NO.4 Which two statements are true about interVLAN routing in the topology that is shown in the exhibit?
(Choose two.)
A. Host E and host F use the same IP gateway address.
B. Router1 and Switch2 should be connected via a crossover cable.
C. Router1 will not play a role in communications between host A and host D.
D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces.
E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the exhibit.
F. The FastEthernet 0/0 interface on Router1 and Switch2 trunk ports must be configured using the same
encapsulation type.
Answer: DF

Cisco   640-816   640-816

NO.5 Refer to the exhibit.
Which two statements are true about the loopback address that is configured on RouterB? (Choose two.)
A. It ensures that data will be forwarded by RouterB.
B. It provides stability for the OSPF process on RouterB.
C. It specifies that the router ID for RouterB should be 10.0.0.1.
D. It decreases the metric for routes that are advertised from RouterB.
E. It indicates that RouterB should be elected the DR for the LAN.
Answer: BC

Cisco   640-816   640-816 dump

NO.6 An administrator is troubleshooting a problem between routers that are using different versions of RIP.
Which two commands would provide information about which version of RIP was being sent and received
on an interface? (Choose two.)
A. show ip protocols
B. show ip route rip
C. show interfaces
D. debug rip routing
E. debug ip rip
Answer: AE

Cisco   640-816자격증   640-816 pdf   640-816

NO.7 Which protocol provides a method of sharing VLAN configuration information between two Cisco
switches?
A. STP
B. VTP
C. 802.1Q
D. RSTP
Answer: B

Cisco   640-816덤프   640-816

NO.8 What is the most appropriate summarization for these routes?
A. 10.0.0.0 /21
B. 10.0.0.0 /22
C. 10.0.0.0 /23
D. 10.0.0.0 /24
Answer: B

Cisco dump   640-816   640-816 pdf   640-816

NO.9 The network technician is planning to use the 255.255.255.224 subnet mask on the network.
Which three valid IP addresses can the technician use for the hosts? (Choose three.)
A. 172.22.243.127
B. 172.22.243.190
C. 172.22.243.191
D. 192.168.1.160
E. 10.17.64.34
F. 10.16.33.98
Answer: BEF

Cisco자격증   640-816   640-816자료   640-816자격증

NO.10 The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the
graphic.
There is concern that a lack of router resources is impeding internetwork performance. As part of
examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the
default and the router IDs are shown with each router.
Which routers are likely to have been elected as DR? (Choose two.)
A. Corp-1
B. Corp-2
C. Corp-3
D. Corp-4
E. Branch-1
F. Branch-2
Answer: DF

Cisco   640-816   640-816최신덤프

NO.11 A network administrator cannot establish a Telnet session with the indicated router. What is the cause of
this failure?
A. A Level 5 password is not set.
B. An ACL is blocking Telnet access.
C. The vty password is missing.
D. The console password is missing.
Answer: C

Cisco자격증   640-816   640-816   640-816 dump

NO.12 At which layer of the OSI model is RSTP used to prevent loops?
A. physical
B. data link
C. network
D. transport
Answer: B

Cisco   640-816   640-816   640-816자격증

NO.13 Which of these represents an IPv6 link-local address?
A. FE80::380e:611a:e14f:3d69
B. FE81::280f:512b:e14f:3d69
C. FEFE:0345:5f1b::e14d:3d69
D. FE08::280e:611:a:f14f:3d69
Answer: A

Cisco pdf   640-816   640-816   640-816 pdf   640-816 dump

NO.14 What are two characteristics of a switch that is configured as a VTP client? (Choose two.)
A. If a switch that is configured to operate in client mode cannot access a VTP server, then the switch
reverts to transparent mode.
B. On switches that are configured to operate in client mode, VLANs can be created, deleted, or renamed
locally.
C. The local VLAN configuration is updated only when an update that has a higher configuration revision
number is received.
D. VTP advertisements are not forwarded to neighboring switches that are configured in VTP transparent
mode.
E. VTP client is the default VTP mode.
F. When switches in VTP client mode are rebooted, they send a VTP advertisement request to the VTP
servers.
Answer: CF

Cisco   640-816자격증   640-816   640-816시험문제

NO.15 How should the FastEthernet0/1 ports on the 2950 model switches that are shown in the exhibit be
configured to allow connectivity between all devices?
A. The ports only need to be connected by a crossover cable.
B. SwitchX (config)# interface fastethernet 0/1
SwitchX (config-if)# switchport mode access
SwitchX (config-if)# switchport access vlan 1
C. SwitchX (config)# interface fastethernet 0/1
SwitchX (config-if)# switchport mode trunk
SwitchX (config-if)# switchport trunk vlan 1
SwitchX (config-if)# switchport trunk vlan 10
SwitchX (config-if)# switchport trunk vlan 20
D. SwitchX(config)# interface fastethernet 0/1
SwitchX(config-if)# switchport mode trunk
Answer: D

Cisco dump   640-816기출문제   640-816   640-816기출문제   640-816 pdf

NO.16 A department decides to replace its hub with a Catalyst 2950 switch that is no longer needed by another
department. To prepare the switch for installation, the network administrator has erased the startup
configuration and reloaded the switch. However, PCs that are connected to the switch experience various
connectivity problems. What is a possible cause of the problem?
A. The VLAN database was not erased.
B. The management VLAN is disabled.
C. The running configuration should have been erased.
D. The "mode" button was not pressed when the switch was reloaded.
E. The switch was not configured with an IP address or a default gateway.
Answer: A

Cisco덤프   640-816   640-816

NO.17 Refer to the exhibit.
Based on the output of the R1# show ip route command and the information presented in the graphic,
which of the following is a potential routing problem?
A. the use of summarization for discontiguous networks
B. the use of CIDR with a routing protocol that does not support it
C. the use of VLSM with a routing protocol that does not support it
D. the use of the no auto-summary command with a protocol that does not support summarization
E. the use of the ip route 0.0.0.0 0.0.0.0 command with a routing protocol that does not support it
Answer: A

Cisco   640-816   640-816   640-816   640-816기출문제

NO.18 The following commands are executed on interface fa0/1 of 2950Switch.
2950Switch(config-if)# switchport port-security
2950Switch(config-if)# switchport port-security mac-address sticky
2950Switch(config-if)# switchport port-security maximum 1
The Ethernet frame that is shown arrives on interface fa0/1.
What two functions will occur when this frame is received by 2950Switch? (Choose two.)
A. The MAC address table will now have an additional entry of fa0/1 FFFF.FFFF.FFFF.
B. Only host A will be allowed to transmit frames on fa0/1.
C. This frame will be discarded when it is received by 2950Switch.
D. All frames arriving on 2950Switch with a destination of 0000.00aa.aaaa will be forwarded out fa0/1.
E. Hosts B and C may forward frames out fa0/1 but frames arriving from other switches will not be
forwarded out fa0/1.
F. Only frames from source 0000.00bb.bbbb, the first learned MAC address of 2950Switch, will be
forwarded out fa0/1.
Answer: BD

Cisco   640-816   640-816   640-816

NO.19 The network administrator has been asked to give reasons for moving from IPv4 to IPv6.
What are two valid reasons for adopting IPv6 over IPv4? (Choose two.)
A. no broadcast
B. change of source address in the IPv6 header
C. change of destination address in the IPv6 header
D. Telnet access does not require a password
E. autoconfiguration
F. NAT
Answer: AE

Cisco시험문제   640-816   640-816

NO.20 Which two of these statements regarding RSTP are correct? (Choose two.)
A. RSTP cannot operate with PVST+.
B. RSTP defines new port roles.
C. RSTP defines no new port states.
D. RSTP is a proprietary implementation of IEEE 802.1D STP.
E. RSTP is compatible with the original IEEE 802.1D STP.
Answer: BE

Cisco   640-816   640-816   640-816자격증   640-816

ITExamDump의Cisco인증 640-816덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Cisco인증 640-816덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.