Adobe 9A0-068 시험문제

Adobe인증9A0-068시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로Adobe인증9A0-068시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도Adobe인증9A0-068시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.Adobe인증9A0-068시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. Adobe인증 9A0-068덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Adobe인증 9A0-068덤프 적중율과 패스율은 100% 보장해드립니다. Adobe인증 9A0-068시험에 도전하려는 분들은ITExamDump 의Adobe인증 9A0-068덤프로 시험을 준비할것이죠?

시험 번호/코드: 9A0-068

시험 이름: Adobe (After Effects CS3 ACE EXAM )

경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Adobe인증 9A0-068시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Adobe인증 9A0-068덤프에 있는 문제만 잘 이해하고 습득하신다면Adobe인증 9A0-068시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.

ITExamDump의 연구팀에서는Adobe 9A0-068인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Adobe 9A0-068덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Adobe 9A0-068이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Adobe 9A0-068시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Adobe 9A0-068덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Adobe 9A0-068덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.

거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Adobe인증 9A0-068시험은 무조건 패스해야 합니다. 하지만Adobe인증 9A0-068시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는Adobe인증 9A0-068시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전Adobe인증 9A0-068덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는Adobe인증 9A0-068영어버전덤프만 공부하시면 자격증을 딸수 있습니다.

9A0-068 덤프무료샘플다운로드하기: http://www.itexamdump.com/9A0-068.html

NO.1 You have an image sequence in a layer. Every image in the sequence has duration of five frames. You
want a smooth transition between the images. Frame blending is checked in the Timeline. How can you
quickly obtain and preview Frame Blending mode for those images?
A.Choose the Time Stretch option for the current layer.
B.Choose Time Remapping to alter the speed of the sequence.
C.Apply the Timewarp effect, and choose the Pixel Motion Method.
D.Choose the Frame Mix mode from the Frame Blending option.
Answer:D

Adobe pdf   9A0-068 dumps   9A0-068   9A0-068인증   9A0-068   9A0-068 dump

NO.2 You want to render a movie file from a composition. The composition is of a motion picture sequence
and involves heavy effects. You want to render the composition by using a network of render engines.
What should you do in the Render Queue panel?
A.Set the Output Module to render an AVI uncompressed movie file.
B.On the Render Settings menu, select Use Open GL Renderer.
C.On the Render Settings menu, set the Proxy Use option to Use No Proxies.
D.Set the Output Module to render a still-image sequence and add a post render action to create a single
movie file.
Answer:D

Adobe자격증   9A0-068시험문제   9A0-068   9A0-068   9A0-068자료   9A0-068

NO.3 You are working on a shot in a layer, showing a car approaching a fixed camera. The car is coming
straight toward the camera. At the end of the shot, the car stops, filling the screen with the front profile of
the car and showing the car logo in the center of the frame. You want to substitute the circular logo on the
front of the car with a graphic on another layer. What should you do?
A.Set Parallel Corner Pin track points at the beginning of the shot, and click Analyze Forward.
B.Set Perspective Corner Pin track points at the beginning of the shot, and click Analyze Forward.
C.Set Position and Scale track points for the logo at the end of the shot, and click Analyze Backward.
D.Set Rotation and Scale track points for the logo at the end of the shot, and click Analyze Backward.
Answer:C

Adobe   9A0-068   9A0-068 pdf   9A0-068

NO.4 You import an image of grayscale clouds and add it to a composition. You want to use the highlights in
the image to reveal the content immediately beneath the image and the shadows in the image to conceal
the content beneath the image. What should you do?
A.On the layer immediately below the clouds layer, select Luma Inverted Matte from the Modes column of
the Timeline panel.
B.On the layer immediately below the clouds layer, select Luma Matte from the Modes column of the
Timeline panel.
C.On the clouds layer, select Luma Inverted Matte from the Modes column of the Timeline panel.
D.On the clouds layer, select Luma Matte from the Modes column of the Timeline panel.
Answer:B

Adobe기출문제   9A0-068   9A0-068   9A0-068   9A0-068

NO.5 What is the file extension of an animation preset?
A..aefx
B..afx
C..ffx
D..aex
Answer:C

Adobe최신덤프   9A0-068 dump   9A0-068시험문제   9A0-068   9A0-068 dump

NO.6 You want to convert PAL footage to the NTSC standard to use in future projects and compositions. What
should you do?
A.Choose Lower Field First for Field Rendering and WSSWW for the 3:2 pull-down menu.
B.Drag the footage from the Project panel to the Render Queue and choose Microsoft DV NTSC for
Output Module.
C.Change the frame rate of the footage to 29.97 fps.
D.Select the footage in the Timeline panel and choose the Frame Blending Option.
Answer:A

Adobe   9A0-068시험문제   9A0-068   9A0-068   9A0-068

NO.7 You render multiple items in a day. You want to add specific information, such as the compressor name
and frame size, to the name of each rendered file. You also want to use this set of parameters in the future.
What should you do?
A.Select the render items and choose Edit> Duplicate with File Name.
B.Choose the Custom value from the Output To menu to create and save a default name in the File Name
Templates dialog box.
C.Select all the render items and click the underlined filename next to Output To to enter a new filename.
D.Choose Preferences >Output and select the Use Default File Name and Folder option.
Answer:B

Adobe자료   9A0-068 dumps   9A0-068

NO.8 You add a Scale animator to a text layer and adjust the Range Selector. You want to animate another
property by using the same Range Selector. What should you do?
A.Select the Text property of the layer and add a new Animator from the Timeline panel.
B.Select the text layer and add a new Animator from the Timeline panel.
C.Select the Scale animator, go to the Animation menu, and then select a new property from the Animate
Text menu.
D.Select the Scale animator, go to the Add menu, and then select Range from the Add Text Selector
menu.
Answer:C

Adobe   9A0-068 pdf   9A0-068 dump   9A0-068자료   9A0-068덤프   9A0-068

NO.9 You create a block of paragraph text in the Composition panel. The text lines are too close together.
Which text property should you adjust to decrease the vertical space between the text lines?
A.Vertical scale
B.Tracking
C.Leading
D.Kerning
Answer:C

Adobe pdf   9A0-068 dump   9A0-068   9A0-068기출문제   9A0-068최신덤프

NO.10 A layer contains a video showing people at a train station, moving from left to right in front of a fixed
camera. You have time remapped the layer to obtain a slow motion effect. Therefore, the layer repeats
many frames. You want to blur and fade together the current repeating frames. Moreover, you do NOT
want to create new frames. What should you do in the Timeline panel?
A.Enable the Best Quality switch.
B.Enable the Motion Blur switch.
C.Enable the Frame Mix Blending mode.
D.Enable the Pixel Motion Blending mode.
Answer:C

Adobe최신덤프   9A0-068최신덤프   9A0-068 pdf   9A0-068   9A0-068   9A0-068인증

NO.11 Click the Exhibit button You have three layers in a composition. You place them at different distances
from the camera. You want the farthest layer to look blurred, as shown in the Exhibit. What should you do
in the Camera Settings dialog box?
A.Set the Focal Length lower than zoom.
B.Set the Blur Level value to 100 percent.
C.Select Enable Depth of Field.
D.Choose 80mm camera from the Preset menu.
Answer:C

Adobe시험문제   9A0-068   9A0-068 dumps   9A0-068자격증   9A0-068

NO.12 In the Graph Editor, you select the Auto-Select Graph Type option. In the Timeline panel, you select a
layer's position property. What will be displayed in the Graph Editor?
A.The Transform box.
B.The Reference graph.
C.The Value graph.
D.The Speed graph.
Answer:D

Adobe시험문제   9A0-068   9A0-068   9A0-068

NO.13 You have a composition with 3D layers and a camera. The camera is animated. You choose the 4
Views-Right option from the Select View Layout menu in the Composition panel. How are the four views
configured?
A.The four views represent the same predefined right view with different zooms.
B.The four views are automatically set to four predefined views (Right, Left, Front, and Top).
C.The 4 Views options represent four possible cameras in the composition. If the number of cameras is
less, some views are disabled.
D.All the four views contain specific 3D views and the view on the left is bigger than the others.
Answer:D

Adobe   9A0-068 dump   9A0-068

NO.14 You want to link the Opacity property of one layer with the Rotation property of another layer. You also
want to create a relative relationship between them. What should you do?
A.Apply a linear expression to either the Opacity property or the Rotation property.
B.Use parenting to make the layer with the targeted Opacity property as the child of the layer with the
targeted Rotation property.
C.Use parenting to make the layer with the targeted Rotation property as the child of the layer with the
targeted Opacity property.
D.Apply an expression to either property and use the Expression pick whip to link them.
Answer:D

Adobe   9A0-068   9A0-068

NO.15 You animate the first two keyframes of a swaying pendulum. You want to duplicate these keyframes.
What should you do?
A.Select both keyframes and hold the CTRL(Windows) or COMMAND(Mac) key while dragging.
B.Select both keyframes and hold the ALT(Windows) or OPTION(Mac) key while dragging.
C.Select the layer and copy and paste by moving the CTI to the location where you want to paste it.
D.Select the first two keyframes, move the CTI to where you want the first selected keyframe to be pasted,
and then copy and paste the keyframe.
Answer:D

Adobe   9A0-068   9A0-068 dumps   9A0-068덤프   9A0-068시험문제

NO.16 You create a string of text on a text layer. You want to animate one character such that it rotates
around its y-axis. What should you do?
A.In the Timeline panel, enable the 3D layer switch and then adjust the layer's Y Rotation value.
B.In the Timeline panel, enable the 3D layer switch and then apply a Rotation animator.
C.From the Animate menu in the text layer, select Enable Per-character 3D and then apply a Rotation
animator.
D.From the Animate menu in the text layer, apply a Rotation animator.
Answer:C

Adobe   9A0-068인증   9A0-068   9A0-068 pdf

NO.17 You apply a text animation preset to a text layer. What happens when you apply a second text
animation preset to the same layer?
A.The new preset replaces the behavior from the original preset.
B.The selectors from the original preset are preserved, and the animators from the new preset replace the
animators from the original preset.
C.The original preset is preserved, and new animators and selectors are added.
D.The animators from the original preset are preserved, and the selectors from the new preset replace
the selectors from the original preset.
Answer:C

Adobe최신덤프   9A0-068   9A0-068인증   9A0-068자격증

NO.18 Your composition contains video and animated text. You want to export the composition in a format
suitable for playing in mobile devices. You also want to preview the result in Adobe Device Central. What
should you do?
A.Choose File> Export to export in MPG-4 format.
B.Choose File> Export to export in Adobe Flash Video (FLV) format.
C.Add the composition to the render queue and choose the H.264 format in the Output Module Settings
dialog box.
D.Add the composition to the render queue and choose the QuickTime Movie format in the Output Module
Settings dialog box.
Answer:C

Adobe자료   9A0-068   9A0-068   9A0-068

NO.19 You create an animation of a car chasing another car around a circular track. However, the speed of
the animation changes abruptly on frames with a keyframe. What should you do?
A.Click the keyframe in the Composition panel with the Convert Vertex tool.
B.Change the keyframe interpolation in the Timeline panel to Continuous Bezier.
C.Select the keyframes in the Timeline panel and click Convert selected keyframes to Linear in the Graph
Editor.
D.Select the keyframes in the Timeline panel and click Convert selected keyframes to Hold in the Graph
Editor.
Answer:B

Adobe최신덤프   9A0-068   9A0-068자격증   9A0-068인증   9A0-068   9A0-068

NO.20 In a composition, you have a layer showing a man holding a rectangular signboard in his hands. The
man is continuously moving, shaking, and turning the sign. You want to track the movement of the sign to
substitute it with a graphic in another layer. What should you do?
A.Track the sign using the Parallel Corner Pin Track Type.
B.Track the sign using the Perspective Corner Pin Track Type.
C.Stabilize the position and rotation of the sign, and then track its position.
D.Track the position of a corner of the sign, and apply the tracked data to the Anchor Point of the graphic.
Answer:B

Adobe dump   9A0-068   9A0-068기출문제   9A0-068최신덤프

ITExamDump의Adobe인증 9A0-068 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Adobe인증 9A0-068덤프로Adobe인증 9A0-068시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Adobe인증 9A0-068덤프는 실제Adobe인증 9A0-068시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.