2013년 10월 11일 금요일

도비 Cisco 642-188 시험

ITExamDump이 바로 아주 좋은Cisco 642-188인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인Cisco 642-188인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는Cisco 642-188인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의Cisco 642-188인증시험덤프는 ITExamDump전문적으로Cisco 642-188인증시험대비로 만들어진 최고의 자료입니다.

ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한Cisco인증642-188시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리Cisco인증642-188덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.

Cisco 642-188인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.

시험 번호/코드: 642-188
시험 이름: Cisco (ITI Implementing Cisco TelePresence Installations)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2013-10-10

IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Cisco 인증 642-188시험은 아주 유용한 시험입니다. Cisco 인증642-188시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Cisco 인증642-188시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Cisco 인증642-188시험덤프는 시장에서 판매하고 있는Cisco 인증642-188덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.

ITExamDump는 여러분이 빠른 시일 내에Cisco 642-188인증시험을 효과적으로 터득할 수 있는 사이트입니다.Cisco 642-188덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Cisco 642-188관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Cisco 642-188덤프로 자신 있는 시험준비를 하세요.

642-188 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-188.html

NO.1 When using Auto-Collaborate, what two actions need to be done to display the laptop content after
connecting the cable? (Choose two.)
A. Press the Auto-Collaborate softkey
B. Initiate Auto-Collaborate on the codec s GUI
C. Set the laptop resolution to 1024x768
D. Set your laptop resolution to 1024x720
E. Use function key on the laptop to send signal to external display
Answer: C,E

Cisco   642-188 dumps   642-188 dump   642-188

NO.2 Which statement is correct when discussing the Cisco TelePresence System 1300.?
A. The system is designed to support meetings of six to eight participants
B. The system features three 65-inch screens, three cameras, microphones, and speakers
C. Voice-enabled switching is performed by the codec to select the active speaker in the room and
capture the video for the remote side
D. The power and Ethernet outlets must be positioned directly behind the unit
Answer: C

Cisco시험문제   642-188   642-188   642-188   642-188 pdf

NO.3 Which option on the Cisco Telepresence System administration WebGUI allows selecting table type?
A. Troubleshooting --> Hardware Setup > Display
B. Troubleshooting > Hardware Setup -> Configuration
C. Troubleshooting -> Hardware Setup --> Camera
D. Troubleshooting -> Hardware Setup -> Other Devices
Answer: B

Cisco   642-188   642-188   642-188

NO.4 What is the leveling process for the Cisco TelePresence System 1000 frame?
A. With only one display, there is no need to level the frame before attaching it to the wall
B. Attach the frame to the wall and level the frame by raising or lowering the feet.
C. Place a level on the middle and upper crossbars and adjust the feet as necessary to ensure that the
frame is horizontally level
D. Place a level on the side of the frame and adjust the feet as necessary to ensure that the frame is
vertically level
Answer: C

Cisco자격증   642-188최신덤프   642-188자료

NO.5 During your RRA assessment of a potential Cisco TelePresence System 1300 room you notice:
The HVAC diffuser has noticeable noise (measured at48 1dB) which sounds like rushing air
What three recommendations should be made to the customer? (Choose three.)
A. The customer should turn the fan level down on the HVAC system to insure the fan noise is minimized
in the Cisco TelePresence room
B. The customer should contact an HVAC specialist to review and recommend an appropriate solution
C. The customer should not worry about the HVAC fan noise because the Cisco TelePresence System
uses a noise suppression algorithm designed to identify HVAC fan noise and minimize those frequencies
D. The customer should replace the diffusers with a diffuser that is rated with a noise criterion of 10 or
greater
E. The customer should replace the ducting directly above the room with acoustically treated ducting to
remove the sound of rushing airflow
Answer: B,D,E

Cisco   642-188기출문제   642-188   642-188 dumps

NO.6 After connecting to a codec via WebGUI, you are prompted for a username and password. Which
username password combination is used on the codec by default?
A. Cisco, Cisco
B. admin, Cisco
C. Cisco, Cisco
D. admin, cisco
Answer: B

Cisco   642-188   642-188인증

NO.7 What are the two choices for focal distance on a CTS-500? (Choose two)
A. 3.5 ft (1.06 m)
B. 4 ft (1.22 m)
C. 6 ft (1.83 m)
D. 8 ft (2.44 m)
E. 8.5 ft (2.59 m)
Answer: B,C

Cisco최신덤프   642-188시험문제   642-188   642-188

NO.8 Which statement is correct when discussing the microphone placement for the Cisco TelePresence
System 1000?
A. A microphone array is built into the frame of the Cisco TelePresence System 1000 so that a table
microphone is unnecessary.
B. Attach the microphone to the table by peeling the backing off the bottom of the microphone base and
stick the microphone to the alignment guide.
C. Place the microphone on the table approximately 18 inches (46 centimeters) forward of where the
participants will sit.
D. You can install the second microphone on the opposite side of the table to provide full-table
microphone coverage for audio-only conferences.
Answer: C

Cisco   642-188   642-188   642-188   642-188최신덤프

NO.9 When using HFR codec in a multipoint call, what happens when an endpoint without HFR calls in?
A. The entire call downgrades the data channel to 5 fps
B. The entire call downgrades the data channel to 5 fps but when the endpoint without HFR codec drops,
it automatically increases the data channel to 30 fps
C. The endpoint without the HFR shares data at 5 fps and all the other endpoints share at 3D fps
D. The call drops since there are different frame rates
Answer: A

Cisco자격증   642-188최신덤프   642-188

NO.10 Which three statements are correct when tuning the camera on a Cisco TelePresence CTS-1xxx system?
(Choose three.)
A. Target placement should match the green and red boxes on the screen, respectively
B. Place the large target three feet behind the small target.
C. Place the large target five feet behind the small target
D. Tune the camera so that the red and green bars line up as closely as possible
E. Perform auto-adjust to optimize focus and sharpness
Answer: A,C,D

Cisco   642-188 pdf   642-188자료   642-188기출문제

NO.11 During your assessment of a potential Cisco TelePresence System 1300 room, you notice:
The ceiling is 8 feel (2 4meters) high and currently illuminated with recessed parabolic light fixtures.
Which lighting recommendation is the most appropriate?
A. The Cisco Telepresence endpoint has a lighting facade which is designed to provide enough light for
the participants face and torso, so no lighting changes are required
B. The ceiling should be raised higher than 8 feet (2.4 meters) to accommodate appropriate light fixtures
for use with Telepresence
C. The existing fixtures are not ideal but are adequate for use with TelePresence
D. The existing fixtures should be replaced with recessed indirect light textures
E. No recommendation can be made until the lighting has been measured with a lux meter in the
appropriate zones
Answer: D

Cisco인증   642-188   642-188인증   642-188자격증

NO.12 The Cisco TelePresence System 1100 and Cisco TelePresence System 1300 mounting brackets has
limited side-to-side adjustability. What is the first thing to consider before you mount the bracket?
A. Attach the sliders on the bracket to the wall.
B. Level the bracket.
C. Verify with the customer where the conference table will be located, find the center of the conference
table, and then find the corresponding point on the mounting wall.
D. Measure the correct width between the drill holes of the mounting bracket.
Answer: C

Cisco   642-188   642-188 pdf   642-188

NO.13 Which two statements about the Cisco TelePresence codec software upgrade process are true?
(Choose two.)
A. Cisco TelePresence codecs must have IP address information for the TFTP servers that the Cisco
Unified Communications Manager uses.
B. During the codec upgrade process, all plasma displays must be in the off position.
C. Cisco TelePresence codecs use H-264 to download system software images and configuration files.
D. To abort the upgrade, you can reboot the codec manually before the codec finishes downloading the
software image.
E. The peripherals upgrade can take up to 60 minutes to complete. Do not manually reboot the codec
during the peripherals upgrade.
Answer: A,E

Cisco자격증   642-188   642-188

NO.14 The customer decides to use static IP addressing for the codec. Which three parameters must be
configured? (Choose three.)
A. IP address
B. IP address subnet mask
C. gateway IP address
D. NTP server IP address
E. DNS server IP address
Answer: A,B,C

Cisco최신덤프   642-188   642-188

NO.15 Which statement is correct when tuning the cameras by using the WebGUI of the Cisco TelePresence
codec?
A. If there is a noticeable flicker on the screen, the 50 Hz Flicker Reduction button will eliminate the flicker
and increase the image resolution.
B. If the user is 4 to 5 feet (1.2 to 1.5 m) away from the display, click the 4 feet radio button for the Focus
Distance radio choice. If the user is farther than 5 feet (1.5 m) away, click the 6 feet choice.
C. If the room uses outside lighting, click the Disable radio button for the Camera Auto Brightness and
Camera Auto Color Balance choices.
D. Auto Color Balance can produce the best results when the colors of the walls in your room are white or
gray.
Answer: B

Cisco   642-188   642-188 dumps

NO.16 Which is a design requirement for Cisco Telepresence room aesthetics?
A. Every room should be identical.
B. Maintain continuity in appearance among rooms
C. Carpet patterns and textures match from room to room
D. All rooms should be painted brown
E. The only wall treatment should be paint
Answer: B

Cisco   642-188덤프   642-188시험문제   642-188기출문제

NO.17 Which two statements are correct when calibrating the Cisco Telepresence cameras?
(Choose two) A. If the room uses fixed artificial lighting, click the Disable radio button fur the Camera Auto
Brightness and Camera Auto Color Balance
B. If the Auto Adjust test to automatically adjust lighting and color balance fails, you may need to add
more light
C. If the room uses fixed artificial lighting, click the Enable- radio button for the Camera Auto Brightness
and Camera Auto Color Balance
D. If the room uses outside lighting, click the Disable radio button for the Camera Auto Brightness and
Camera Auto Color Balance
Answer: A,B

Cisco인증   642-188   642-188자료

NO.18 In the Cisco TelePresence administration WebGUI, the camera Auto Adjust can be used to check which
setting?
A. life size
B. zoom and focus
C. white color balance
D. HDMI input threshold
Answer: C

Cisco   642-188자료   642-188

NO.19 Refer to the exhibit.
Identify the port number where the Audio Video expansion box should connect.
A. 4
B. 5
C. 6
D. 7
E. 9
F. 10
G. 11
H. 12
I. 13
Answer: H

Cisco dumps   642-188   642-188자격증   642-188

NO.20 What is the default configuration for displaying presentations on a Cisco Telepresence System 1000?
A. An external display for displaying presentations is part of the default configuration.
B. Presentations are displayed as presentation-in-picture.
C. Presentations are displayed on an external display and include a presentation codec.
D. A projector and screen are used to display presentations.
Answer: B

Cisco   642-188   642-188기출문제

ITexamdump의 00M-617덤프의 VCE테스트프로그램과 HP2-B101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C-TSCM62-65시험에 대비한 고품질 덤프와 000-N32시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-H28시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/642-188.html

댓글 없음:

댓글 쓰기