2013년 10월 6일 일요일

HP HP0-Y11 인증시험

HP인증HP0-Y11시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. HP인증HP0-Y11시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.

ITExamDump는 유일하게 여러분이 원하는HP인증HP0-Y11시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.

시험 번호/코드: HP0-Y11
시험 이름: HP (ProCurve Security 7.31)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 132 문항
업데이트: 2013-10-05

여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이HP HP0-Y11인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.

경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. HP인증 HP0-Y11시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게HP인증 HP0-Y11시험에서 고득점으로 패스하고 싶다면ITExamDump의HP인증 HP0-Y11덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.

제일 빠른 시일내에 제일 간단한 방법으로HP인증 HP0-Y11시험을 패스하는 방법이 없냐구요? ITExamDump의HP인증 HP0-Y11덤프를 공부하시면 가능합니다. ITExamDump의HP인증 HP0-Y11덤프는 많은 분들이 검증한 가장 유력한HP인증 HP0-Y11시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.

ITExamDump는HP인증HP0-Y11시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에HP인증HP0-Y11시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.HP인증HP0-Y11시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.

ITExamDump에서는HP 인증HP0-Y11시험대비덤프를 발췌하여 제공해드립니다. HP 인증HP0-Y11시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인HP 인증HP0-Y11시험대비덤프로HP 인증HP0-Y11시험준비공부를 해보세요. 통과율이 100%입니다.

HP0-Y11 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y11.html

NO.1 Which statements describing MAC authentication on ProCurve switches are correct? (Select two.)
A. It can be configured on the same port with Web authentication and 802.1X authentication.
B. The device's MAC address is sent to the RADIUS server as the user name and password.
C. The switch's built-in DHCP server initially assigns an IP address in the 192.168.0.0 private subnet.
D. The switch automatically initiates user authentication of a device when the device communicates on a
MAC authenticator port.
E. Configuration involves defining ports as MAC authenticators, the RADIUS authentication protocol to
use, and then activating the ports for MAC authentication operation.
Answer: BD

HP최신덤프   HP0-Y11   HP0-Y11   HP0-Y11 dumps

NO.2 Which statement describing Web authentication support on the ProCurve Switch 5400zl series is
correct?
A. User credentials or a digital certificate can authenticate the client.
B. It is mutually exclusive of other authentication methods on the same port.
C. After successful user authentication, a port is assigned to a VLAN based on an order of priority.
D. If a port is configured to support multiple users, different static untagged VLANs can be assigned
concurrently.
Answer: C

HP인증   HP0-Y11   HP0-Y11   HP0-Y11자격증   HP0-Y11

NO.3 What is a capability of the Secure Access Wizard supported by ProCurve Identity Driven Manager?
A. It configures 802.1X authenticator ports and RADIUS server settings on a switch.
B. It verifies the integrity of the ProCurve Identity Driven Manager database using Active Directory.
C. It conceals all security-related credentials stored in the switch configuration before backing up the file.
D. It checks a switch configuration file's 802.1X, Web, or MAC authentication settings for consistency and
reports any
errors.
Answer:A

HP   HP0-Y11자료   HP0-Y11   HP0-Y11   HP0-Y11

NO.4 You want to use 802.1X port-access authentication to assign Microsoft Active Directory users to a
particular VLAN
based on user credentials. Which condition must exist?
A. The VLAN ID must exist on the switch.
B. The VLAN ID must be defined in a GVRP configuration.
C. The port through which the user is authenticating must be defined as a member of the VLAN.
D. The user must be a member of an Active Directory Group that has an associated RADIUS remote-
access policy.
Answer:A

HP   HP0-Y11 pdf   HP0-Y11 dumps   HP0-Y11   HP0-Y11덤프

NO.5 Which two EAP methods support tunneling of a weaker authentication method such as MS-CHAPv2?
A. TLS and SIM
B. PAP and SPAP
C. LEAP and FAST
D. PEAP and TTLS
Answer: D

HP   HP0-Y11최신덤프   HP0-Y11시험문제

NO.6 Network security can be described in terms of multiple layers of security. Which action describes a
perimeter security measure?
A. limiting switch access to SSH
B. deploying 802.1X authentication
C. installing an Intrusion Prevention System
D. using a secure operating system for network applications
Answer: C

HP   HP0-Y11   HP0-Y11기출문제   HP0-Y11자료

NO.7 What is an operational difference between the TLS and MD5 EAP methods?
A. TLS uses a challenge/handshake mechanism for authentication; MD5 uses certificates for
authentication.
B. TLS uses a challenge/handshake mechanism for authentication and encryption; MD5 uses certificates
for authentication and encryption.
C. TLS uses digital certificates for mutual authentication; MD5 uses a challenge/handshake mechanism
to authenticate the client to the server.
D. TLS uses a name and password along with digital certificates to produce a session key; MD5 uses a
name and password to produce a session key.
Answer: C

HP최신덤프   HP0-Y11   HP0-Y11   HP0-Y11 dump   HP0-Y11자료   HP0-Y11

NO.8 Which EAP methods support authentication of an 802.1X supplicant based on a user's name and
password? (Select two.)
A. SIM
B. TLS
C. TTLS
D. SPAP
E. PEAP
F. CHAP
Answer: CE

HP최신덤프   HP0-Y11 dump   HP0-Y11 pdf

NO.9 Click the Exhibit button.
The RADIUS server and switch are correctly configured. The switch has the VLAN assignments and
port-access
commands configured, as shown in the diagram.
What happens to port 10 after the user connects to the network?
A. remains in an unauthorized state
B. becomes a member of VLAN 20
C. becomes a member of VLAN 25
D. becomes a member of VLAN 200
Answer: D

HP   HP0-Y11인증   HP0-Y11기출문제   HP0-Y11인증

NO.10 Which statements describing the 802.1X user authentication process are correct? (Select two.)
A. The supplicant and authentication server must support the same EAP method for the authentication
process to proceed.
B. A switch passes EAP messages between the supplicant and authentication switch without modification
or translation.
C. After a RADIUS server confirms a user is authenticated, the switch sends an EAP-Success message
and sets the port state to authorized.
D. Different RADIUS servers must be configured on the switch if authentication of both switch
management users and 802.1X supplicants will be performed.
E. If a supplicant receives an EAP-Request message specifying a particular EAP method to be supported,
the authentication session is closed if the supplicant does not support that EAP method.
Answer:AC

HP   HP0-Y11시험문제   HP0-Y11시험문제   HP0-Y11자격증

NO.11 Authentication of switch management or general network users can involve multiple network
components. Which statement describing these network components is correct?
A. A user directory server operates as the policy enforcement point.
B. The authentication server is also known as the policy decision point.
C. A ProCurve switch functions as a policy repository for switch management access using a remote user
account.
D. A RADIUS access-accept message is used by a client to acknowledge authentication settings
assigned by the server.
Answer: B

HP   HP0-Y11 dumps   HP0-Y11   HP0-Y11기출문제   HP0-Y11덤프   HP0-Y11

NO.12 A university shares a core routing switch between two departments. Each department has a separate
ProCurve edge switch deployed and neither department wants the other to have management access to
their respective switch. Which security measures can prevent management access by the respective
departments? (Select three.)
A. Enable the Privilege Mode option.
B. Configure Authorized IP Managers.
C. Define Secure Management VLANs.
D. Implement Command Authorization.
E. Use RADIUS authentication with separate policies.
Answer: BCE

HP덤프   HP0-Y11덤프   HP0-Y11

NO.13 A customer calls you and describes a switch management access problem involving SSH. The
customer indicates that he is denied access after supplying the login credentials. The customer is using a
RADIUS server for centralized authentication, and has used the ping command to verify that the SSH
client, switch, and RADIUS server are all reachable. What is a potential cause of this problem?
A. A self-signed digital certificate has not been installed on the switch.
B. SSH has not been configured for the login access level on the switch.
C. A remote-access policy on the RADIUS server has not been configured to support the CHAP protocol.
D. The digital certificate of the public Certificate Authority used by the switch has not been installed in the
SSH client.
Answer: C

HP최신덤프   HP0-Y11   HP0-Y11   HP0-Y11   HP0-Y11기출문제

NO.14 You have just installed two ProCurve 5406zl switches, one on the second floor and one on the third
floor of your office. You are using 802.1X for port-access authentication. All users have an 802.1X
supplicant installed on their computers and you have configured a RADIUS server with a remote access
policy for each floor. Shortly after connecting the computers, users on the second floor report that they
cannot access any network resources. You can ping the RADIUS server from both switches, but when
you check the RADIUS log, you see authentication requests coming only from the third floor switch. Why
are the second floor users unable to connect to the network?
A. The IP address of the RADIUS server has not been configured on the second floor switch.
B. The second floor computers are using the wrong EAP type for authentication with the RADIUS server.
C. The shared secret configured on the second floor switch does not match the shared secret configured
on the RADIUS server.
D. No default gateway has been configured on the second floor switch, therefore no authentication
requests can reach the RADIUS server.
Answer:A

HP최신덤프   HP0-Y11   HP0-Y11 dump   HP0-Y11자격증

NO.15 Which statement describing dynamic VLAN assignment for 802.1X authenticator ports on ProCurve
switches is correct?
A. If a GVRP-learned VLAN is used, the RADIUS server must specify that attribute.
B. The VLAN used may be statically defined on the switch or learned through GVRP.
C. If a client fails authentication, the port is reassigned to the Secure Management VLAN.
D. If a client is authenticated, but no VLAN attribute is returned by a RADIUS server, the switch blocks the
port.
Answer: B

HP   HP0-Y11   HP0-Y11 pdf   HP0-Y11자격증

NO.16 Which protocols are supported by a ProCurve switch for communication with a RADIUS server that is
used to authenticate 802.1X supplicants? (Select two.)
A. EAP-RADIUS
B. MD5-RADIUS
C. CHAP-RADIUS
D. PAP-SPAP-RADIUS
E. MS-CHAPv2-RADIUS
Answer:AC

HP시험문제   HP0-Y11   HP0-Y11자격증   HP0-Y11

NO.17 You have ProCurve Identity Driven Manager currently deployed in your network and have recently
modified an Access Profile. Which task should you perform next?
A. Restart the IDM Agent.
B. Deploy the configuration.
C. Run the Secure Access Wizard.
D. Update the Access Policy Groups.
E. Start Active Directory synchronization.
F. Rediscover switches affected by the changes.
Answer: B

HP최신덤프   HP0-Y11최신덤프   HP0-Y11 dump   HP0-Y11 dumps

NO.18 Which EAP method is considered the least secure solution for implementing 802.1X user
authentication on a wireless LAN?
A. SIM
B. MD5
C. TTLS
D. FAST
E. LEAP
F. PEAP
Answer: B

HP자격증   HP0-Y11   HP0-Y11   HP0-Y11기출문제

NO.19 Which statements describing Web authentication support on ProCurve switches are correct? (Select
two.)
A. An SSL-based login is required.
B. It can be configured on ports that also have MAC authentication assigned.
C. A successfully authenticated user can be redirected to a configurable URL.
D. The switch's built-in DHCP, ARP, and DNS services assist with Web authentication while a port is in
the authenticating state.
E. When a client connects to a Web authenticator port and a Web browser is opened, the Web browser is
automatically redirected to the switch's Web-Auth home page.
Answer: CD

HP   HP0-Y11   HP0-Y11최신덤프   HP0-Y11

NO.20 Which statements describing the ProCurve switch debug facility are correct? (Select two.)
A. The instrumentation monitor must be enabled first.
B. Specific debug message categories can be selectively enabled.
C. The debug destinations can be set to a session window and a Syslog server concurrently.
D. Debug messages have the same format as standard Event Log messages including the event type
and timestamp.
Answer: BC

HP기출문제   HP0-Y11인증   HP0-Y11   HP0-Y11기출문제   HP0-Y11기출문제

ITexamdump의 70-341덤프의 VCE테스트프로그램과 HP2-B102덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 ICBB시험에 대비한 고품질 덤프와 C_TSCM62_65시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y11.html

댓글 없음:

댓글 쓰기