ITExamDump의 Microsoft인증 70-667덤프를 선택하여Microsoft인증 70-667시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고Microsoft인증 70-667시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. Microsoft인증 70-667덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
만약 아직도Microsoft 70-667시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Microsoft 70-667인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Microsoft 70-667인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Microsoft 70-667시험을 패스하실 수 있으며,Microsoft 70-667자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
ITExamDump 의 학습가이드에는Microsoft 70-667인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Microsoft 70-667인증시험도 고득점으로 패스하게 해드릴 것입니다.
시험 번호/코드: 70-667
시험 이름: Microsoft (TS: Microsoft SharePoint Server 2010, Configuring )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 249 문항
업데이트: 2013-12-01
ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여Microsoft 70-667관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리Microsoft 70-667도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. Microsoft인증 70-667덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Microsoft인증 70-667덤프 적중율과 패스율은 100% 보장해드립니다. Microsoft인증 70-667시험에 도전하려는 분들은ITExamDump 의Microsoft인증 70-667덤프로 시험을 준비할것이죠?
ITExamDump의 Microsoft인증 70-667덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Microsoft인증 70-667덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
많은 사이트에서도 무료Microsoft 70-667덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Microsoft 70-667데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리ITExamDump에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다
70-667 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-667.html
NO.1 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to back up the
contents of a custom list every day. The solution must minimize the size of the backup.
What should you do?
A. From Central Administration, click Performa site collection backup.
B. From Central Administration, click Perform a backup.
C. Create a scheduled task that runs the backup-spsite cmdlet.
D. Create a scheduled task that runs the export-spweb cmdlet.
Answer: D
Microsoft최신덤프 70-667 70-667최신덤프 70-667 dump 70-667
NO.2 You configure a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You have a site collection
named http://www.contoso.com based on the Team Site template that has anonymous access enabled.
You need to ensure that anonymous users cannot view application-level pages.
What should you do?
A. From the SharePoint 2010 Management Shell, run the following cmdlet:
Disable-SPFeatureDocumentSet -Url "http://www.contoso.com"
B. Add User1 to the Site Owners group.
C. From the SharePoint 2010 Management Shell, run the following cmdlet:
Disable-SPFeatureViewFormPagesLockdown -Url "http://www.contoso.com"
D. From the SharePoint 2010 Management Shell, run the following cmdlet:
Enable-SPFeatureViewFormPagesLockdown -Url http://www.contoso.com
E. From the SharePoint 2010 Management Shell, run the following script:
$spWeb = Get-SPWeb "http://www.contoso.com/sales" $spWeb.BreakRoleInheritance($false)
$spWeb.Dispose( )
F. From the SharePoint 2010 Management Shell, run the following script:
$spWeb = Get-SPWeb "http://www.contoso.com/sales" $spWeb.BreakRoleInheritance($true)
$spWeb.Dispose( )
G. Add User1 as a site collection administrator.
H. GrantDesign permissions to the Sales SharePoint user group.
Answer: D
Microsoft덤프 70-667 70-667
NO.3 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You configure the User Profile
Synchronization Service to use a new user account as a service account. You discover that user profiles
are not imported from Active Directory. You verify that the service is running, and then you run the
Forefront Identity Manager service. You receive the following error message: "Replication Access is
Denied." You need to ensure that the user profiles are imported from Active Directory. Which permissions
should you assign to which service account?
A. the Replication synchronization permission to the service account of the User Profile Synchronization
Service
B. the Replication synchronization permission to the service account of the farm
C. the Replicating Directory Changes permission to the service account of the farm
D. the Replicating Directory Changes permission to the service account of the User Profile
Synchronization Service
Answer: D
Microsoft시험문제 70-667최신덤프 70-667 70-667인증 70-667
NO.4 You are piloting the deployment of a SharePoint Server 2010 Service Pack 1 (SP1) server farm named
Farm1. Farm1 contains two front-end Web servers and an application server. You create a new site
collection that contains five sites. You need to simulate 200 user connections to the sites. The solution
must use the minimum amount of administrative effort.
Which tool should use?
A. Stsadm
B. Microsoft SharePoint Designer
C. Test-Connection
D. Microsoft Visual Studio
Answer: D
Microsoft최신덤프 70-667 dump 70-667 70-667 pdf 70-667 70-667자료
NO.5 Your network contains two servers named Server1 and Server2 that run Microsoft SQL Server. All of
the databases on Server1 are mirrored to Server2. You have a SharePoint Server 2010 Service Pack 1
(SP1) server farm that is configured to use Server1 as the database server for all of the databases.
You need to ensure that users can access all SharePoint sites if Server1 fails.
What should you configure?
A. the Business Data Connectivity service application
B. a failover server for each SharePoint database
C. a failover server for each service applicaiton
D. a failover server for each content database
Answer: B
Microsoft 70-667 70-667덤프 70-667 70-667덤프 70-667인증
NO.6 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to ensure that a user
can create Excell Services service applications. The solution must minimize the number of permissions
assigned to the user.
What should you do?
A. Add a new managed account to the server farm.
B. Modify the Farm Administrators group.
C. Modify the service accounts of the server farm.
D. Modify the administrators of the Excel Services service application.
Answer: B
Microsoft 70-667 70-667기출문제 70-667 70-667인증
NO.7 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm.
The List View Threshold property is set to 7,500.
You need to ensure that developers can retrieve a maximum of 7,500 items from a list.
What should you do?
A. Create an information management policy.
B. Enable HTTP request throttling
C. Modify the Allow Object Model Override setting.
D. Modify the value of the List View Lookup Threshold
Answer: C
Microsoft자격증 70-667 70-667덤프 70-667최신덤프
NO.8 Your company network includes a SharePoint Server 2010 Service Pack 1 (SP1) server. You create an
http://www.contoso.com web application that has multiple site collections. The site collections have a
large amount of content residing across lists. You deploy custom web parts that query the list items
through the SharePoint object model. You need to ensure that the custom code that queries the list items
and default list views remains within 2,500 items for each request.
What should you do?
A. Set the value of List View Threshold to 2500. Set the value of Object Model Override to No.
B. Set the value of List View Lookup Threshold to 2500. Set the value of Object Model Override to No.
C. Set the value of HTTP Request Monitoring and Throttling to No. Set the value of Daily Time Windows
for Large Queries to 0 hours.
D. Set the value of the PropertySize attribute to 2500 on the WebPartLimits node in the web.config file.
Answer: A
Microsoft 70-667덤프 70-667기출문제 70-667 70-667자료
NO.9 You configure a SharePoint 2010 farm.
You need to gather data from existing logs on critical events only.
What should you do?
A. Run the following Windows PowerShell cmdlet:
Set-SPLogLevel -EventSeverity ErrorCritical
Get-SPLogLevel
B. Run the following Windows PowerShell cmdlet:
Get-SPLogEvent | Out-GridView
C. Run the following Windows PowerShell cmdlet:
Get-SPLogLevel -Identity "Cricial Issues"
D. Use the SharePoint Health Analyzer feature.
Answer: A
Microsoft 70-667 70-667시험문제 70-667자격증 70-667자료
NO.10 You have a deployment of Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2). The
deployment includes the following servers:
A. One Microsoft SQL Server 2005 server named Server1
B. One SharePoint server named Server2
All servers run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You need to ensure that
you can perform an in-place upgrade of SharePoint Server 2010 Service Pack 1 (SP1).
What should you do?
A. On Server2, upgrade to the 64-bit edition of Windows Server 2008.
B. On Server1, upgrade SQL Server 2005 to SQL Server 2008.
C. On Server1, upgrade to the 64-bit edition of Windows Server 2008
D. On Server2, install Windows Server 2003 Service Pack 3 (SP3).
Answer: A
Microsoft 70-667 70-667 70-667 70-667 pdf
NO.11 ( Note: This quesiton is part of a series of questions that use the same set of answer choices. Each
answer choice may be used once, more than once, or not at all.)
You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains two web
applications named WebApp1 and WebApp2. WebApp1 contains one site collection. The site collection
contains 300 sites.
WebApp2 is used to host personal sites.
You need to ensure that you receive a notification when more than 400 personal sites are created.
Which Windows PowerShell cmdlet should you use?
A. Set-SPContentDatabase
B. New-SPWebApplication
C. Set-SPTimerJob
D. Set-SPWeb
E. Set-SPLogLevel
F. Set-SPDiagnosticConfig
G. Enable-SPTimerJob
H. Set-SPUsageService
I. Remove-SPUsageApplication
J. Set-SPAlternateURL
K. New-SPWebApplicationExtension
L. Enable-SPHealthAnalysisRule
M. Set-SPSite
N. Install-SPApplicationContent
Answer: A
Microsoft 70-667최신덤프 70-667 dumps
NO.12 You configure a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to perform
backup and restore of a site collection and its content database by using Windows PowerShell. Which
command should you run to back up a web application?
A. Backup-SPSite http://localhost -Path \\FileServer_Name\SharePointBackupFolder\SiteBackup. bak
B. Restore-SPFarm -Directory \\FileServer_Name\ share\site_name.bak -RestoreMethod Overwrite
-ConfigurationOnly
C. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -BackupMethod Full
D. Restore-SPFarm -Directory \\FileServer_Name\share\site_name.bak -RestoreMethod Overwrite Item
"Farm\Microsoft SharePoint Foundation Web Application\AdventureWorks"
E. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -Item "Farm\Microsoft
SharePoint Foundation Web Application\AdventureWorks" -BackupMethodFull
F. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -BackupMethod Full Item
WSS_AdventureWorks
G. Restore-SPFarm -Directory \\FileServer_Name\share\site_name.bak -RestoreMethod Overwrite Item
WSS_AdventureWorks
H. Restore-SPSite http://localhost -Path \\FileServer_Name\SharePointBackupFolder SiteBackup. bak
-Force
Answer: F
Microsoft 70-667 70-667덤프 70-667시험문제 70-667 dumps
NO.13 applications named WebApp1 and WebApp2. WebApp1 contains one site collection. The site collection
contains 300 sites. WebApp2 is used to host personal sites. You need to ensure that trace logs are
deleted automatically two days after the logs are created. Which Windows PowerShell cmdlet should you
use?( Note: This quesiton is part of a series of questions that use the same set of answer choices. Each
answer choice may be used once, more than once, or not at all.)
A. Set-SPContentDatabase
B. Set-SPUsageService
C. Set-SPSite
D. Set-SPDiagnosticConfig
E. Install-SPApplicationContent
F. Set-SPWeb
G. Set-SPAlternateURL
H. Set-SPTimerJob
I. Enable-SPHealthAnalysisRule
J. New-SPWebApplication
K. Enable-SPTimerJob
L. Set-SPLogLevel
M. New-SPWebApplicationExtension
N. Remove-SPUsageApplication
Answer: D
Microsoft 70-667최신덤프 70-667
NO.14 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains a site
collection named Intranet.
You upload a custom solution to the Solution Gallery of Intranet. You discover that you cannot activate the
custom solution. You need to ensure that you can activate the solution in Intranet.
What should you do?
A. From Central Administration, start the Application Registry Service.
B. From Windows PowerShell, run Start-Service -Name SPUserCodeV4.
C. From Central Administration, create a new service application.
D. From Central Administration, start the Microsoft SharePoint Foundation Sandboxed Code Service.
E. From a command prompt, run stsadm.exe -o execadmsvcjobs
F. From Windows PowerShell, run Start-Service -Name SPAdminV4
G. From Central Administration, activate the Global Web Parts feature.
H. From Windows PowerShell, run New-SPAccessServiceApplication -Name SandboxSolution
Confirm:$true.
Answer: B
Microsoft 70-667 pdf 70-667최신덤프 70-667최신덤프 70-667
NO.15 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains two web
applications named WebApp1 and WebApp2.
WebApp1 contains one site collection. The site collection contains 300 sites.
WebApp2 is used to host personal sites.
You need to prevent the site collection in WebApp1 from containing more than 100 GB of data. Which
Windows PowerShell cmdlet should you use?( Note: This quesiton is part of a series of questions that use
the same set of answer choices. Each answer choice may be used once, more than once, or not at all.)
A. Set-SPUsageService
B. Set-SPTimerJob
C. Enable-SPTimerJob
D. New-SPWebApplication
E. Set-SPDiagnosticConfig
F. Enable-SPHealthAnalysisRule
G. Remove-SPUsageApplication
H. Set-SPAlternateURL
I. New-SPWebApplicationExtension
J. Set-SPSite
K. Set-SPWeb
L. Set-SPContentDatabase
M. Set-SPLogLevel
N. Install-SPApplicationContent
Answer: J
Microsoft인증 70-667 70-667덤프
NO.16 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You have a custom application
that queries a list, and then generates a report every night at 01:00. You discover that the report cannot be
executed due to the list view threshold. You need to ensure that the report is executed successfully. What
should you modify from Central Administration?
A. the Resource Throttling settings
B. the schedule for the Microsoft SharePoint Foundation Usage Data Processingjob
C. the User Solution Management settings
D. the schedule for the Solution Daily Resource Usage Update job
Answer: A
Microsoft덤프 70-667최신덤프 70-667기출문제
NO.17 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to ensure that users
can receive SMS alert notifications.
What should you configure?
A. the Service Application Associations settings from Central Administration
B. the Send To Connections settings from Central Administration
C. the mobileControls settings in the web.config file
D. the Mobile Account settings from Central Administration
Answer: D
Microsoft dumps 70-667덤프 70-667최신덤프
NO.18 Your company network includes a SharePoint Server 2010 Service Pack 1 (SP1) server.
A sandbox solution repeatedly fails.
You need to prevent the solution from running. You also need to ensure that the resolution affects no other
sandboxed solutions in the site collection.
What should you do.?
A. From the Site Collection Quotas and Locks page, raise the resource quota that is applied to the site
collection
B. From Microsoft SQL Server Management Studio, set the status of the site collection content database
to read-only.
C. From the SharePoint 2010 Management Shell, run the Remove-SPUserSolution PowerShell cmdlet.
D. From Central Administration, add the solution as a Blocked Solution on the Sandboxed Solution
Management page.
Answer: D
Microsoft 70-667 dumps 70-667인증
NO.19 You have a Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2) server farm. You upgrade
the server farm to SharePoint Server 2010 Server Pack 1 (SP1). You open a SharePoint site and discover
that you cannot select the Visual Upgrade option. You need to ensure that you can perform a visual
upgrade of the SharePoint site.
What should you do?
A. Run stsadm.exe and specify the preupgradecheck operation
B. Run the upgrade-spcontentdatabase cmdlet.
C. Run psconfig.exe and specify the -cmd parameter.
D. Run stsadm.exe and specify the setproperty operation.
Answer: B
Microsoft pdf 70-667 70-667 70-667 dump
NO.20 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains a web
application named WebApp1. WebApp1 contains one site collection named Portal.
WebApp1 is configured to use NTLM authentication.
You need to implement forms-based authentication for Portal. What should you do? (Each correct answer
part of the solution. Choose all that apply.)
A. Modify the Client.config file.
B. Modify the Web.config file.
C. Create a managed metadata service connection.
D. Extend WebApp1.
E. Create a new web application.
Answer: BD
Microsoft자격증 70-667시험문제 70-667 70-667 70-667
ITexamdump의 HP2-B102덤프의 VCE테스트프로그램과 000-089덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_HANASUP_1시험에 대비한 고품질 덤프와 HP2-K34시험 최신버전덤프를 제공해드립니다. 최고품질 CTAL-TM_Syll2012시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기