인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? IBM인증 C2090-731시험이 어렵다고 하여 두려워 하지 마세요. IT자격증을 취득하려는 분들의 곁에는ITExamDump가 있습니다. ITExamDump의IBM인증 C2090-731시험준비를 하시고 시험패스하여 자격증을 취득하세요. 국제승인 자격증이라 고객님의 경쟁율을 업그레이드 시켜드립니다.
IBM 000-593인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이IBM인증시험중의000-593시험을 안전하게 패스하도록 도와줍니다. ITExamDump에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다
IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. IBM 인증 C2090-731시험은 아주 유용한 시험입니다. IBM 인증C2090-731시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는IBM 인증C2090-731시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는IBM 인증C2090-731시험덤프는 시장에서 판매하고 있는IBM 인증C2090-731덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
시험 이름: DB2 9 DBA for Linux,UNIX and Windows
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 C2090-731시험후기
100% 합격율 보장
Q&A: 138 문항 C2090-731자격증시험자료
업데이트: 2014-06-15
C2090-731시험후기: >>펼쳐보기
시험 이름: IBM Tivoli Netcool/OMNIbus V7.4 Fundamentals
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 000-593덤프자료
100% 합격율 보장
Q&A: 175 문항 000-593자격시험
업데이트: 2014-06-15
000-593덤프자료: >>펼쳐보기
ITExamDump의 IBM인증 C2090-731시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. IBM인증 C2090-731덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 IBM인증 C2090-731덤프가 있으면 시험패스가 한결 간편해집니다.
네트웨크시대인 지금 인터넷에 검색하면 수많은IBM인증 C2090-731시험공부자료가 검색되는데 그중에서도ITExamDump에서 출시한 IBM인증 C2090-731덤프가 가장 높은 인지도를 지니고 있습니다. IBM인증 C2090-731덤프에는IBM인증 C2090-731시험문제의 기출문제와 예상문제가 수록되어있어 덤프에 있는 문제만 잘 공부하시면 시험은 가볍게 패스가능합니다. IBM인증 C2090-731시험을 통과하여 자겨증취득하는 꿈에 더욱 가까이 다가가세요.
IBM인증C2090-731시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로IBM인증C2090-731시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도IBM인증C2090-731시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.IBM인증C2090-731시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.
C2090-731 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2090-731.html
NO.1 A transaction that receives a log disk full error (SQL0968C) will fail and be rolled back.
In order
to prevent the roll back, which of the following should be done?
A.Set BLK_LOG_DSK_FUL to NO
B.Set BLK_LOG_DSK_FUL to YES
C.Decrease space for the active log directory
D.Reduce the LOGPRIMARY, LOGSECOND and LOGFILSIZ
Correct:B
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.2 Which of the following settings would allow 20 sorts with a maximum of 10MB each to
run
concurrently on a 64-bit instance?
A.Set the DB SHEAPTHRES to 50000 and the DB SORTHEAP to 2500.
B.Set the DBM SHEAPTHRES to 50000 and the DB SORTHEAP to 2500.
C.Set the DBM SHEAPTHRES to 50000 and the DBM SORTHEAP to 2500.
D.Set the DBM SHEAPTHRES_SHR to 50000 and the DBM SHEAPTHRES to 2500.
Correct:B
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.3 A DBA needs to set the DIAGLEVEL configuration parameter to 4 while users are
connected to
the database. How can this change be implemented in a way that has a minimum impact to
the
environment?
A.Quiesce the database and update the parameter.
B.Attach to the instance and update the parameter.
C.Connect to the database in a single user mode and update the parameter.
D.Attach to the instance, update the parameter, stop and restart the instance.
Correct:B
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.4 A recovery of database DB1 is started by issuing RECOVER DATABASE DB1 TO END
OF LOGS.
The recovery fails during the rollforward phase. In order to continue the recovery from the
point of
failure, which of the following commands should be executed?
A.RECOVER DATABASE DB1 RESTART
B.RECOVER DATABASE DB1 TO END OF LOGS
C.RECOVER DATABASE DB1 TO END OF LOGS RESTART
D.RECOVER DATABASE DB1 CONTINUE TO END OF LOGS
Correct:B
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.5 Recovering a single table space to a point in time:
A.requires archive log files from the last restorable backup.
B.is not possible, table spaces must be recovered to end of logs.
C.is not possible if the disks for that table space are not recoverable.
D.requires the sysadmin to connect to the target database prior to issuing the command.
Correct:A
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.6 Given the following notification log entry: 2006-02-13-14.34.35.965000-300
I17502H435 LEVEL:
Error PID : 940 TID : 660 PROC : db2syscs.exe INSTANCE: DB2 NODE : 000 DB : SAMPLE
APPHDL : 0-1433 APPID: *LOCAL.DB2.050120082811 FUNCTION: DB2 UDB, data
protection,
sqlpsize, probe:20 RETCODE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not
found."
DIA8411C A file "" could not be found. Which letter from the function name sqlpsize should
be
used to look up information about this function in the Support and Troubleshooting section of
the
Information Center?
A.The last letter
B.The fifth letter
C.The fourth letter
D.The second last letter
Correct:C
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.7 As part of a high availability takeover strategy using HADR, the LOG INDEX BUILD
table
attribute for the APPLICANT table is set to OFF. What is the most likely effect of this change?
A.After failover, the APPLICANT table index may be rebuilt.
B.An attempt to create a unique index on the APPLICANT table will fail.
C.Index builds for the APPLICANT table on the primary system will take longer.
D.The LOGINDEXBUILD database configuration parameter overrides the table attribute.
Correct:A
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
NO.8 Given the following situation: Table space ts1 with tables t1, t2, t3 Table space ts2 with
tables t4,
t5 Tables t1 and t4 have defined referential integrity on them (t1 is the parent, t4 is the child)
What
happens after restoring the table space ts1 and issuing the following command? db2
rollforward
db sample to 2006-06-16-14.21.56 and stop tablespace(ts1)
A.The roll forward is executed to the end of logs.
B.The roll forward is not executed and an error message is generated.
C.The roll forward is executed and table t4 is placed in set integrity pending state.
D.The roll forward is executed and tables t1 and t4 are placed in set integrity pending state.
Correct:C
IBM C2090-731덤프다운 C2090-731자격증자료 C2090-731 C2090-731 IT국제자격증
댓글 없음:
댓글 쓰기