ITExamDump에는 전문적인 업계인사들이 발췌한 시험대비공부자료를 제공!: 4월 2014

2014년 4월 29일 화요일

RedHat 인증 RH302 덤프

인테넷에 검색하면 RedHat RH302시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의RedHat RH302제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.

ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 RedHat인증RH302시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 RedHat인증RH302덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.

IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. RedHat인증 RH302시험이 아무리 어려워도ITExamDump의RedHat인증 RH302덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의RedHat인증 RH302덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.

많은 사이트에서 RedHat인증 RH302시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의RedHat인증 RH302덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.

ITExamDump의RedHat인증 RH302시험덤프공부가이드 마련은 현명한 선택입니다. RedHat인증 RH302덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.

ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한RedHat 인증RH302덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는RedHat 인증RH302덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.

시험 번호/코드: RH302
시험 이름: RedHat (Red Hat Certified Engineer on Redhat Enterprise Linux 5 (Labs))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 330 문항
업데이트: 2014-04-28

RH302 덤프무료샘플다운로드하기: http://www.itexamdump.com/RH302.html

NO.1 CORRECT TEXT
Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.2 mke2fs -j /dev/hda? ¨¤ To create ext3 filesystem.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.3 CORRECT TEXT
There is a server having 172.24.254.254 and 172.25.254.254. Your System lies on 172.24.0.0/16.
Make successfully ping to 172.25.254.254 by Assigning following IP: 172.24.0.x Where x is your station
number.
Answer and Explanation:
1. vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=x.x.x.x
NETMASK=x.x.x.x
2. Enter the IP Address as given station number by your examiner: example: 172.24.0.1
3. Enter Subnet Mask
4. Enter Default Gateway and primary name server
5. press on ok
6. ifdown eth0
7. ifup eth0
8. verify using ifconfig
In the lab server is playing the role of router, IP forwarding is enabled. Just set the Correct IP and gateway,
you can ping to 172.25.254.254.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.4 Write:

RedHat   RH302   RH302   RH302 pdf   RH302

NO.5 CORRECT TEXT
Your System is configured in 192.168.0.0/24 Network and your nameserver is 192.168.0.254.
Make successfully resolve to server1.example.com.
Answer and Explanation:
Very Easy question, nameserver is specified in question,
1. vi /etc/resolv.conf
nameserver 192.168.0.254
2. host server1.example.com

RedHat   RH302   RH302   RH302 pdf   RH302

NO.6 CORRECT TEXT
Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com ¨¤ This will set the host name only for current session. To set
hostname permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart

RedHat   RH302   RH302   RH302 pdf   RH302

NO.7 CORRECT TEXT
Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer and Explanation: 1. vi /etc/resolv.conf
Write : nameserver 192.168.0.254

RedHat   RH302   RH302   RH302 pdf   RH302

NO.8 CORRECT TEXT
The System you are using is for NFS (Network File Services). Some important data are shared from your
system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session,we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or
ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.9 CORRECT TEXT
There is one partition /dev/hda14 mounted on /data. The owner of /data is root user and root group. And
Permission is full to owner user, read and execute to group member and no permission to others. Now
you should give the full permission to user user1 without changing pervious permission.
Answer and Explanation:
We know that every files/directories are owned by certain user and group. And Permissions are defines to
owner user, owner group and other.
-rwxr-x--- ¨¤Full permission to owner user, read and write to owner group and no permission to
others.
According to question: We should give the full permission to user user1 without changing the previous
permission.
ACL (Access Control List), in ext3 file system we can give permission to certain user and certain group
without changing previous permission. But that partition should mount using acl option.
Follow the stepsvi /etc/fstab
/dev/hda14 /data ext3 defaults,acl 0 1Either Reboot or use: mount -o remount /datasetfacl -m
u:user1:rwx /dataVerify using: getfacl /data

RedHat   RH302   RH302   RH302 pdf   RH302

NO.10 Or

RedHat   RH302   RH302   RH302 pdf   RH302

NO.11 CORRECT TEXT
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging
192.168.1.0/24 Network's Host.
Answer and Explanation:
1. vi /etc/sysconfing/network
NETWORKING=yes
HOSTNAME=station?.example.com
GATEWAY=192.168.0.254
2. service network restart
Or
1. vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
2. ifdown eth0
3. ifup eth0

RedHat   RH302   RH302   RH302 pdf   RH302

NO.12 Use mkfs -t ext3 /dev/hda? Where ? is your partition number

RedHat   RH302   RH302   RH302 pdf   RH302

NO.13 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.14 /dev/hda? /mnt/neo ext3 defaults 1 2

RedHat   RH302   RH302   RH302 pdf   RH302

NO.15 CORRECT TEXT
You are giving RHCT Exam and in your Exam paper there is a question written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network ¨¤ What, What is written here. Actually here are these parameters
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
-Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command

RedHat   RH302   RH302   RH302 pdf   RH302

NO.16 Press P to verify the partitions lists and remember the partitions name.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.17 Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size here.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.18 Either Reboot or use partprobe command.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.19 vi /etc/fstab

RedHat   RH302   RH302   RH302 pdf   RH302

NO.20 CORRECT TEXT
One Package named zsh is dump on ftp://server1.example.com under /pub/updates directory and your
FTP server is 192.168.0.254. Install the package zsh.
Answer and Explanation:
1. rpm -ivh ftp://server1/example.com/pub/updates/zsh-*
or
1. Login to ftp server : ftp ftp://server1.example.com using anonymous user.
2. Change the directory: cd pub and cd updates
3. Download the package: mget zsh-*
4. Quit from the ftp prompt : bye
5. Install the package
6. rpm -ivh zsh-*
7. Verify either package is installed or not : rpm -q zsh

RedHat   RH302   RH302   RH302 pdf   RH302

NO.21 CORRECT TEXT
Your system is giving error while booting on Runlevel 5 . Make successfully boot your system in
runlevel 5.
Answer and Explanation:
While you load the X Window System, you will get the problem. To troubleshoot follow the
following steps:
1. Check the /tmp is full ?
2. Check your quota, hard limit is already crossed ?
3. Check xfs service is running ?
4. Boot the system on runlevel 3 and execute the system-config-display command
5. Edit the /etc/inittab to set default runlevel 5.
id:5:initdefault:

RedHat   RH302   RH302   RH302 pdf   RH302

NO.22 mount /dev/hda? /mnt/neo
4 CORRECT TEXT
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP
Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will
take the value from /etc/sysctl.conf.
5.CORRECT TEXT
Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6.CORRECT TEXT
neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky question from redhat. Actually question is giving scenario to you to implement quota toneo
user. You should apply the quota to neo user on /home that neo user shouldn't occupied space more than
70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0 ¨¤ To enable th
quota on filesystem you should mount
the filesystem with usrquota for user quota and grpquota for group quota.
2. touch /home/aquota.user ¨¤Creating blank quota database file.
3. mount -o remount /home ¨¤ Remounting the /home with updated mount options. ou can verify that
/home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ¨¤ Initialization the quota on /home
5. edquota -u neo /home ¨¤ Quota Policy editor
See the snapshot
Disk quotas for user neo (uid 500):
Filesystem blocks soft hard inodes soft hard
/dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7.CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size
of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without losing
any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the
size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical
Volume without unmount as well as we can bring the actual size of Logical Volume on online using
ext2online command.
8.CORRECT TEXT
Quota is implemented on /data but not working properly. Find out the
Problem and implement the quota to user1 to have a soft limit 60 inodes
(files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobyte-sized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions
of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab
/dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data
and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9.CORRECT TEXT
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as Physical
Extents (PE). As there are several other concepts associated with the LVM system, let's start with some
basic definitions:
* Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
* Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized
PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
* Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
* Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home
and /var on an LV.
* Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most
of the commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 ¨¤ to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10.CORRECT TEXT
Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? ¨¤ To create ext3 filesystem
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11 CORRECT TEXT
You are new System Administrator and from now you are going to handle the system and your
main task is Network monitoring, Backup and Restore. But you don't know the root password.
Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the
root's password. To change the root password you need to boot the system into single user mode.
You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12 CORRECT TEXT
There are more then 400 Computers in your Office. You are appointed as a System Administrator.
But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you
enable IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf ¨¤ when System Reboot on next time, etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13.CORRECT TEXT
You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully
run X Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window)./tmp is full ornotQuota is
already reachedVideo card or resolution or monitor is misconfigured.xfs service is running or not.
Do These:
1. df -h /tmp ¨¤ /tmp is full remove the unnecessary filequota username ¨¤ if quota is alread
reached remove unnecessary file from home directory.Boot the System in runlevel 3.¨¤ you can
pass the Kernel Argument from boot loader.Use command: system-config-display ¨¤ It will display a
dialog to configure the monitor, Video card, resolution etc.Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14 CORRECT TEXT
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP
Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24
Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
15 CORRECT TEXT
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name. Default System ID is 83
that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
12. mkswap /dev/hda?¨¤ To create Swap File system on partition.
13. swapon /dev/hda?¨¤ To enable the Swap space from partition.
14. free -m ¨¤ Verify Either Swap is enabled or not.
15. vi /etc/fstab
/dev/hda? swap swap defaults 0 0
16. Reboot the System and verify that swap is automatically enabled or not.
16.CORRECT TEXT
You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from allservers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from otherhost
configure:
1. vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
17 CORRECT TEXT
You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You
changed the root password, again unable to login as a root. How will you make Successfully Login as a
root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:Boot the System on Single user mode.Change the passwordCheck the account expire
date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
1. Check the file /etc/securetty ¨¤ Which file blocked to root login from certain terminal
2. If terminal is deleted or commented write new or uncomment.
3. Reboot the system and login as a root.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.23 Verify by mounting on current Sessions also:

RedHat   RH302   RH302   RH302 pdf   RH302

NO.24 CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size
of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing
any data. The size of logical volume 200MB to 210MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Make sure that the filesystem is in a consistent state before reducing:
# fsck -f /dev/vo/myvol
3. Now reduce the filesystem by 200MB.
# resize2fs /dev/vo/myvol 200M
4. It is now possible to reduce the logical volume.
#lvreduce /dev/vo/myvol -L 200M
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h

RedHat   RH302   RH302   RH302 pdf   RH302

NO.25 CORRECT TEXT
Add a new logical partition having size 100MB and create the /data which will be the mount point for the
new partition.
Answer and Explanation:Use fdisk /dev/hda ¨¤ To create new parition.Type n ¨¤ For New
partitionsIt will ask for Logical or Primary Partitions. Press l for logical.It will ask for the Starting Cylinder:
Use the Default by pressing Enter Key.Type the Size: +100M ¨¤ You can Specify either Last cylinder of
Size here.Press P to verify the partitions lists and remember the partitions name.Press w to write on
partitions table.Either Reboot or use partprobe command.Use mkfs -t
ext3 /dev/hda?Ormke2fs -j /dev/hda? ¨¤ To create ext3 filesystem.vi /etc/fstabWrite:/dev/hda? /data
ext3 defaults 0 0Verify by mounting on current Sessions also:mount /dev/hda? /data

RedHat   RH302   RH302   RH302 pdf   RH302

NO.26 CORRECT TEXT
Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is
172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
# dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer
translate domain names such as www.redhat.com to IP addresses such as 216.148.218.197. As
no individual DNS server is large enough to keep a database for the entire Internet, they can refer
requests to other DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium
Users wants to access by name so DNS will interpret the name into ip address. You need to specify the
Address if DNS server in each and every client machine. In Redhat Enterprise Linux, you need to specify
the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.27 Press w to write on partitions table.

RedHat   RH302   RH302   RH302 pdf   RH302

NO.28 CORRECT TEXT
Successfully resolv to server1.example.com where your DNS server is 172.24.254.254
Answer and Explanation:
1. vi /etc/resolv.conf
nameserver 172.24.254.254
2. host server1.example.com

RedHat   RH302   RH302   RH302 pdf   RH302

NO.29 mkdir /mnt/neo

RedHat   RH302   RH302   RH302 pdf   RH302

NO.30 CORRECT TEXT
Change the root Password to redtophat
Answer and Explanation:Boot the system in Single user modeUse the passwd command

RedHat   RH302   RH302   RH302 pdf   RH302

ITexamdump의 646-365덤프의 VCE테스트프로그램과 C4040-124덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 LOT-409시험에 대비한 고품질 덤프와 C_TPLM30_66시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-405시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/RH302.html

RedHat 자격증 EX200 시험문제와 답

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는RedHat EX200관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

ITExamDump에서는 가장 최신이자 최고인RedHat인증 EX200시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. RedHat인증 EX200덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. RedHat인증 EX200시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.

RedHat인증EX200시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. 그 방법은 바로ITExamDump의RedHat인증EX200시험준비덤프자료를 구매하여 공부하는 것입니다. 문항수도 적고 시험예상문제만 톡톡 집어 정리된 덤프라 시험합격이 한결 쉬워집니다.

IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. RedHat 인증EX200시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. RedHat 인증EX200시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 RedHat 인증EX200덤프는 시장에서 가장 최신버전입니다.

영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인RedHat인증 EX200시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. RedHat인증 EX200시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의RedHat인증 EX200덤프는 RedHat인증 EX200시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.

시험 번호/코드: EX200
시험 이름: RedHat (Red Hat Certified System Administrator - RHCSA)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 24 문항
업데이트: 2014-04-28

EX200 덤프무료샘플다운로드하기: http://www.itexamdump.com/EX200.html

NO.1 Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40
GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)

RedHat EX200덤프 EX200자격증 EX200인증

NO.2 Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The user:
tom's login shell should be non-interactive.
Answer:
# useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
(Show the login shell)
OR
# system-config-users

RedHat EX200덤프 EX200자격증 EX200인증

ITexamdump의 HP2-N37덤프의 VCE테스트프로그램과 HP0-S34덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-465시험에 대비한 고품질 덤프와 70-463시험 최신버전덤프를 제공해드립니다. 최고품질 000-622시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/EX200.html

Oracle 1Z1-051 덤프

ITExamDump 의 Oracle인증 1Z1-051덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.

Oracle인증1Z1-051시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는Oracle인증1Z1-051시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 Oracle인증1Z1-051덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Oracle 1Z1-051인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Oracle 1Z1-051인증시험을 패스할 수 있다는 것을 보장합니다.

Oracle 1Z1-051인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면Oracle 1Z1-051인증시험이 아주 좋은 자격증입니다. 만약Oracle 1Z1-051인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.

IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 Oracle인증 1Z1-051덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제Oracle인증 1Z1-051시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.

여러분은 우리. ITExamDump의Oracle 1Z1-051시험자료 즉 덤프의 문제와 답만 있으시면Oracle 1Z1-051인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.

ITExamDump의 Oracle 1Z1-051덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 Oracle 1Z1-051덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.

시험 번호/코드: 1Z1-051
시험 이름: Oracle (Oracle Database: SQL Fundamentals I)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 254 문항
업데이트: 2014-04-28

1Z1-051 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z1-051.html

NO.1 You need to produce a report where each customer's credit limit has been incremented by $1000. In
the output, t he customer's last name should have the heading Name and the incremented credit limit
should be labeled New Credit Limit. The column headings should have only the first letter of each word in
uppercase .
Which statement would accomplish this requirement?
A. SELECT cust_last_name Name, cust_credit_limit + 1000
"New Credit Limit"
FROM customers;
B. SELECT cust_last_name AS Name, cust_credit_limit + 1000
AS New Credit Limit
FROM customers;
C. SELECT cust_last_name AS "Name", cust_credit_limit + 1000
AS "New Credit Limit"
FROM customers;
D. SELECT INITCAP(cust_last_name) "Name", cust_credit_limit + 1000
INITCAP("NEW CREDIT LIMIT")
FROM customers;
Answer: C

Oracle최신덤프   1Z1-051 pdf   1Z1-051인증

NO.2 Which statement is true regarding the INTERSECT operator?
A. It ignores NULL values.
B. Reversing the order of the intersected tables alters the result.
C. The names of columns in all SELECT statements must be identical.
D. The number of columns and data types must be identical for all SELECT statements in the query.
Answer: D

Oracle인증   1Z1-051   1Z1-051기출문제   1Z1-051   1Z1-051기출문제   1Z1-051 dump

NO.3 Which SQL statements would display the value 1890.55 as $1,890.55? (Choose three .)
A. SELECT TO_CHAR(1890.55,'$0G000D00')
FROM DUAL;
B. SELECT TO_CHAR(1890.55,'$9,999V99')
FROM DUAL;
C. SELECT TO_CHAR(1890.55,'$99,999D99')
FROM DUAL;
D. SELECT TO_CHAR(1890.55,'$99G999D00')
FROM DUAL;
E. SELECT TO_CHAR(1890.55,'$99G999D99')
FROM DUAL;
Answer: ADE

Oracle pdf   1Z1-051 dump   1Z1-051   1Z1-051

NO.4 View the Exhibit and examine the structure of the SALES, CUSTOMERS, PRODUCTS, and TIMES
tables.
The PROD_ID column is the foreign key in the SALES table, which references the PRODUCTS table.
Similarly, the CUST_ID and TIME_ID columns are also foreign keys in the SALES table referencing the
CUSTOMERS and TIMES tables, respectively.
Evaluate the following CREATE TABLE command:
CREATE TABLE new_sales(prod_id, cust_id, order_date DEFAULT SYSDATE)
AS
SELECT prod_id, cust_id, time_id
FROM sales;
Which statement is true regarding the above command?
A. The NEW_SALES table would not get created because the DEFAULT value cannot be specified in the
column definition.
B. The NEW_SALES table would get created and all the NOT NULL constraints defined on the specified
columns would be passed to the new table.
C. The NEW_SALES table would not get created because the column names in the CREATE TABLE
command and the SELECT clause do not match.
D. The NEW_SALES table would get created and all the FOREIGN KEY constraints defined on the
specified columns would be passed to the new table.
Answer: B

Oracle pdf   1Z1-051 dumps   1Z1-051   1Z1-051자격증   1Z1-051 dump   1Z1-051덤프

NO.5 View the Exhibit and examine the structure of the CUSTOMERS table.
Which two tasks would require subqueries or joins to be executed in a single statement? (Choose two.)
A. listing of customers who do not have a credit limit and were born before 1980
B. finding the number of customers, in each city, whose marital status is 'married'
C. finding the average credit limit of male customers residing in 'Tokyo' or 'Sydney'
D. listing of those customers whose credit limit is the same as the credit limit of customers residing in the
city 'Tokyo'
E. finding the number of customers, in each city, whose credit limit is more than the average credit limit of
all the customers
Answer: DE

Oracle   1Z1-051시험문제   1Z1-051   1Z1-051

NO.6 Examine the structure of the PROMOTIONS table:
name Null Type
PROMO_ID NOT NULL NUMBER(6)
PROMO_NAME NOT NULL VARCHAR2(30)
PROMO_CATEGORY NOT NULL VARCHAR2(30)
PROMO_COST NOT NULL NUMBER(10,2)
The management wants to see a report of unique promotion costs in each promotion category.
Which query would achieve the required result?
A. SELECT DISTINCT promo_cost, promo_category FROM promotions;
B. SELECT promo_category, DISTINCT promo_cost FROM promotions;
C. SELECT DISTINCT promo_cost, DISTINCT promo_category FROM promotions;
D. SELECT DISTINCT promo_category, promo_cost FROM promotions ORDER BY 1;
Answer: D

Oracle덤프   1Z1-051인증   1Z1-051최신덤프

NO.7 Evaluate the following query:
SQL> SELECT promo_name q'{'s start date was }' promo_begin_date
AS "Promotion Launches"
FROM promotions;
What would be the outcome of the above query?
A. It produces an error because flower braces have been used.
B. It produces an error because the data types are not matching.
C. It executes successfully and introduces an 's at the end of each promo_name in the output.
D. It executes successfully and displays the literal " {'s start date was } " for each row in the output.
Answer: C

Oracle   1Z1-051   1Z1-051   1Z1-051 dumps

NO.8 View the E xhibit and examine the data in the EMPLOYEES table.
You want to generate a report showing the total compensation paid to each employee to date.
You issue the following query:
SQL>SELECT ename ' joined on ' hiredate
', the total compensation paid is '
TO_CHAR(ROUND(ROUND(SYSDATE-hiredate)/365) * sal + comm)
"COMPENSATION UNTIL DATE"
FROM employees;
What is the outcome?
A. It generates an error because the alias is not valid.
B. It executes successfully and gives the correct output.
C. It executes successfully but does not give the correct output.
D. It generates an error because the usage of the ROUND function in the expression is not valid.
E. It generates an error because the concatenation operator can be used to combine only two items.
Answer: C

Oracle   1Z1-051   1Z1-051   1Z1-051

NO.9 You need to extract details of those products in the SALES table where the PROD_ID column
contains the string '_D123'.
Which WHERE clause could be used in the SELECT statement to get the required output?
A. WHERE prod_id LIKE '%_D123%' ESCAPE '_'
B. WHERE prod_id LIKE '%\_D123%' ESCAPE '\'
C. WHERE prod_id LIKE '%_D123%' ESCAPE '%_'
D. WHERE prod_id LIKE '%\_D123%' ESCAPE '\_'
Answer: B

Oracle   1Z1-051   1Z1-051   1Z1-051

NO.10 Using the CUSTOMERS table, you need to generate a report that shows 50% of each credit
amount in each income level. The report should NOT show any repeated credit amounts in each income
level.
Which query would give the required result?
A. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
B. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
C. SELECT DISTINCT cust_income_level ' ' cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
D. SELECT cust_income_level ' ' cust_credit_limit * 0.50 AS "50% Credit Limit"
FROM customers;
Answer: C

Oracle자격증   1Z1-051   1Z1-051   1Z1-051   1Z1-051 dumps

NO.11 View the Exhibit; e xamine the structure of the PROMOTIONS table.
Each promotion has a duration of at least seven days .
Your manager has asked you to generate a report, which provides the weekly cost for each promotion
done to l date.
Which query would achieve the required result?
A. SELECT promo_name, promo_cost/promo_end_date-promo_begin_date/7
FROM promotions;
B. SELECT promo_name,(promo_cost/promo_end_date-promo_begin_date)/7
FROM promotions;
C. SELECT promo_name, promo_cost/(promo_end_date-promo_begin_date/7)
FROM promotions;
D. SELECT promo_name, promo_cost/((promo_end_date-promo_begin_date)/7)
FROM promotions;
Answer: D

Oracle인증   1Z1-051   1Z1-051 dumps   1Z1-051최신덤프   1Z1-051 dump

NO.12 Which two statements are true regarding the USING and ON clauses in table joins? (Choose two.)
A. Both USING and ON clauses can be used for equijoins and nonequijoins.
B. A maximum of one pair of columns can be joined between two tables using the ON clause.
C. The ON clause can be used to join tables on columns that have different names but compatible data
types.
D. The WHERE clause can be used to apply additional conditions in SELECT statements containing the
ON or the USING clause.
Answer: CD

Oracle기출문제   1Z1-051자격증   1Z1-051

NO.13 Evaluate the following query:
SELECT INTERVAL '300' MONTH,
INTERVAL '54-2' YEAR TO MONTH,
INTERVAL '11:12:10.1234567' HOUR TO SECOND
FROM dual;
What is the correct output of the above query?
A. +25-00 , +54-02, +00 11:12:10.123457
B. +00-300, +54-02, +00 11:12:10.123457
C. +25-00 , +00-650, +00 11:12:10.123457
D. +00-300 , +00-650, +00 11:12:10.123457
Answer: A

Oracle pdf   1Z1-051 dump   1Z1-051기출문제   1Z1-051   1Z1-051자료

NO.14 View the Exhibit and examine the data in the CUSTOMERS table.
Evaluate the following query:
SQL> SELECT cust_name AS "NAME", cust_credit_limit/2 AS MIDPOINT,MIDPOINT+100 AS "MAX
LOWER LIMIT"
FROM customers;
The above query produces an error on execution.
What is the reason for the error?
A. An alias cannot be used in an expression.
B. The a lias NAME should not be enclosed with in double quotation marks .
C. The MIDPOINT+100 expression gives an error because CUST_CREDIT_LIMIT contains NULL
values.
D. The a lias MIDPOINT should be enclosed with in double quotation marks for the
CUST_CREDIT_LIMIT/2 expression .
Answer: A

Oracle   1Z1-051   1Z1-051

NO.15 Which two statements are true regarding single row functions? (Choose two.)
A. They a ccept only a single argument.
B. They c an be nested only to two levels.
C. Arguments can only be column values or constants.
D. They a lways return a single result row for every row of a queried table.
E. They c an return a data type value different from the one that is referenced.
Answer: DE

Oracle자료   1Z1-051   1Z1-051   1Z1-051덤프   1Z1-051

NO.16 Examine the structure of the SHIPMENTS table:
name Null Type
PO_ID NOT NULL NUMBER(3)
PO_DATE NOT NULL DATE
SHIPMENT_DATE NOT NULL DATE
SHIPMENT_MODE VARCHAR2(30)
SHIPMENT_COST NUMBER(8,2)
You want to generate a report that displays the PO_ID and the penalty amount to be paid if the
SHIPMENT_DATE is later than one month from the PO_DATE. The penalty is $20 per day.
Evaluate the following two queries:
SQL> SELECT po_id, CASE
WHEN MONTHS_BETWEEN (shipment_date,po_date)>1 THEN
TO_CHAR((shipment_date - po_date) * 20) ELSE 'No Penalty' END PENALTY
FROM shipments;
SQL>SELECT po_id, DECODE
(MONTHS_BETWEEN (po_date,shipment_date)>1,
TO_CHAR((shipment_date - po_date) * 20), 'No Penalty') PENALTY
FROM shipments;
Which statement is true regarding the above commands?
A. Both execute successfully and give correct results.
B. Only the first query executes successfully but gives a wrong result.
C. Only the first query executes successfully and gives the correct result.
D. Only the second query executes successfully but gives a wrong result.
E. Only the second query executes successfully and gives the correct result.
Answer: C

Oracle최신덤프   1Z1-051덤프   1Z1-051 pdf   1Z1-051시험문제

NO.17 View the Exhibit and examine the structure of the PRODUCTS table.
You need to generate a report in the following format:
CATEGORIES
5MP Digital Photo Camera's category is Photo
Y Box's category is Electronics
Envoy Ambassador's category is Hardware
Which two queries would give the required output? (Choose two.)
A. SELECT prod_name q'''s category is ' prod_category CATEGORIES
FROM products;
B. SELECT prod_name q'['s ]'category is ' prod_category CATEGORIES
FROM products;
C. SELECT prod_name q'\'s\' ' category is ' prod_category CATEGORIES
FROM products;
D. SELECT prod_name q'<'s >' 'category is ' prod_category CATEGORIES
FROM products;
Answer: CD

Oracle기출문제   1Z1-051   1Z1-051   1Z1-051 dump

NO.18 View the Exhibit to examine the description for the SALES table.
Which views can have all DML operations performed on it? (Choose all that apply.)
A. CREATE VIEW v3
AS SELECT * FROM SALES
WHERE cust_id = 2034
WITH CHECK OPTION;
B. CREATE VIEW v1
AS SELECT * FROM SALES
WHERE time_id <= SYSDATE - 2*365
WITH CHECK OPTION;
C. CREATE VIEW v2
AS SELECT prod_id, cust_id, time_id FROM SALES
WHERE time_id <= SYSDATE - 2*365
WITH CHECK OPTION;
D. CREATE VIEW v4
AS SELECT prod_id, cust_id, SUM(quantity_sold) FROM SALES
WHERE time_id <= SYSDATE - 2*365
GROUP BY prod_id, cust_id
WITH CHECK OPTION;
Answer: AB

Oracle   1Z1-051   1Z1-051

NO.19 Which three statements are true regarding the data types in Oracle Database 10g/11g? (Choose
three.)
A. Only one LONG column can be used per table.
B. A TIMESTAMP data type column stores only time values with fractional seconds.
C. The BLOB data type column is used to store binary data in an operating system file.
D. The minimum column width that can be specified for a VARCHAR2 data type column is one.
E. The value for a CHAR data type column is blank-padded to the maximum defined column width.
Answer: ADE

Oracle   1Z1-051   1Z1-051

NO.20 View the Exhibit and examine the structure of the PRODUCTS table.
All products have a list price.
You issue the following command to display the total price of each product after a discount of 25% and a
tax of 15% are applied on it. Freight charges of $100 have to be applied to all the products.
SQL>SELECT prod_name, prod_list_price -(prod_list_price*(25/100))
+(prod_list_price -(prod_list_price*(25/100))*(15/100))+100
AS "TOTAL PRICE"
FROM products;
What would be the outcome if all the parenthese s are removed from the above statement?
A. It produces a syntax error.
B. The result remains unchanged.
C. The total price value would be lower than the correct value.
D. The total price value would be higher than the correct value.
Answer: B

Oracle   1Z1-051   1Z1-051 dump   1Z1-051 dumps

ITexamdump의 70-687덤프의 VCE테스트프로그램과 EX0-003덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-597시험에 대비한 고품질 덤프와 850-001시험 최신버전덤프를 제공해드립니다. 최고품질 C4070-603시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z1-051.html

1Z0-040 덤프 Oracle 인증

ITExamDump에서 출시한 Oracle인증 1Z0-040덤프는 실제시험문제 커버율이 높아 시험패스율이 가장 높습니다. Oracle인증 1Z0-040시험을 통과하여 자격증을 취득하면 여러방면에서 도움이 됩니다. ITExamDump에서 출시한 Oracle인증 1Z0-040덤프를 구매하여Oracle인증 1Z0-040시험을 완벽하게 준비하지 않으실래요? ITExamDump의 실력을 증명해드릴게요.

다른 사이트에서도Oracle 1Z0-040인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.

시험 번호/코드: 1Z0-040
시험 이름: Oracle (Oracle database 10g:new features for adminsitrators)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 200 문항
업데이트: 2014-04-28

발달한 네트웨크 시대에 인터넷에 검색하면 많은Oracle인증 1Z0-040시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의Oracle인증 1Z0-040시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의Oracle인증 1Z0-040 실제시험 문제를 연구하여 만든Oracle인증 1Z0-040덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의Oracle인증 1Z0-040덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.

ITExamDump의 연구팀에서는Oracle 1Z0-040인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Oracle 1Z0-040덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Oracle 1Z0-040이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Oracle 1Z0-040시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Oracle인증 1Z0-040시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Oracle인증 1Z0-040덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.

현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로Oracle 1Z0-040인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼Oracle 1Z0-040인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,

ITExamDump 에서는 IT인증시험에 대비한 퍼펙트한Oracle 인증1Z0-040덤프를 제공해드립니다. 시험공부할 시간이 충족하지 않은 분들은ITExamDump 에서 제공해드리는Oracle 인증1Z0-040덤프로 시험준비를 하시면 자격증 취득이 쉬워집니다. 덤프를 구매하시면 일년무료 업데이트서비스도 받을수 있습니다.

1Z0-040 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-040.html

NO.1 You need to ensure that the database users should be able to use the various flashback query features
in order to go back in time by four hours. What would you do to achieve this? (Choose two.)
A.set SQL_TRACE=True
B.set UNDO_RETENTION=14400
C.set FAST_START_MTTR_TARGET=240
D.set LOG_CHECKPOINT_INTERVAL=240
E.set DB_FLASHBACK_RETENTION_TARGET=14400
F.issue ALTER DATABASE FLASHBACK ON; command
G.set the RETENTION GUARANTEE clause for the undo tablespace
Answer: BG

Oracle pdf   1Z0-040 dumps   1Z0-040   1Z0-040   1Z0-040 dumps

NO.2 You have 100 segments in the USERS tablespace. You realize that the USERS tablespace is running
low on space. You can use Segment Advisor to _____.
A.add data files to the tablespace
B.identify the segments that you should shrink
C.modify the storage parameters for the tablespace
D.automatically shrink the segments with unused space
E.check the alerts generated for the tablespace that is running low on space
Answer: B

Oracle   1Z0-040 pdf   1Z0-040기출문제   1Z0-040기출문제

NO.3 You have three temporary tablespace groups named G1, G2, and G3 in your database.
You are creating a new temporary tablespace as follows:
CREATE TEMPORARY TABLESPACE TEMP1 TEMPFILE '/u1/data/temp1.dbf' SIZE 10M
TABLESPACE GROUP '';
Which statement regarding the above command is correct?
A.It will create the tablespace TEMP1 in group G1.
B.It will create the tablespace TEMP1 in group G3.
C.It will not add the tablespace TEMP1 to any group.
D.It will create the tablespace TEMP1 in the default group.
E.It will throw an error with message 'specified group is not available'.
F.It will create a new group with a system-generated name and add the tablespace TEMP1 to it.
Answer: C

Oracle인증   1Z0-040기출문제   1Z0-040   1Z0-040

NO.4 View the Exhibit and examine the recommendation graph provided for a test database by the Undo
Advisor.
The graph recommends that the size of undo tablespace should be set to _____.
A.1 MB
B.6 MB
C.10 MB
D.15 MB
E.11 MB
Answer: E

Oracle   1Z0-040   1Z0-040자료

NO.5 Which are the three levels at which the Segment Advisor generates advice? (Choose three.)
A.block level
B.object level
C.schema level
D.segment level
E.tablespace level
Answer: BDE

Oracle   1Z0-040최신덤프   1Z0-040기출문제   1Z0-040자료   1Z0-040

NO.6 View the Exhibit and examine the SQL statement used to create the EMP table.
You need to shrink the EMP table segment. Which SQL statement would you execute as a prerequisite
before you execute the ALTER TABLE emp SHRINK SPACE; command?
A.ALTER TABLESPACE emp OFFLINE;
B.ALTER TABLESPACE emp READ ONLY;
C.ALTER TABLE emp DEALLOCATE UNUSED;
D.ALTER TABLE emp ENABLE ROW MOVEMENT;
E.ALTER TABLE emp DISABLE ALL TRIGGERS;
F.ALTER TABLE emp ENABLE NOVALIDATE CONSTRAINT emp_last_name_nn;
Answer: D

Oracle인증   1Z0-040   1Z0-040

NO.7 You have 100 segments in the USERS tablespace. You get an alert that the USERS tablespace is
running low on space. You decide to shrink some segments. Which option would you use to determine
which segments to shrink?
A.Segment Advisor
B.SQL Tuning Advisor
C.SQL Access Advisor
D.Segment Resource Estimation
E.Automatic Database Diagnostic Monitor (ADDM)
Answer: A

Oracle   1Z0-040   1Z0-040자료   1Z0-040   1Z0-040

NO.8 Which two statements regarding the FLASHBACK_TRANSACTION_QUERY view are correct?
(Choose two.)
A.You can find information about only active transactions from the view.
B.You can find information about read only transactions from the view.
C.You require the SELECT ANY TRANSACTION system privilege to access the view.
D.You can find information about both active and committed transactions from the view.
E.You require the SELECT ON FLASHBACK_TRANSACTION_QUERY object privilege to access the
view.
Answer: CD

Oracle   1Z0-040덤프   1Z0-040자격증   1Z0-040 pdf   1Z0-040

NO.9 You are checking every 10 minutes for alerts regarding the violation of tablespace usage threshold.
Some of the tablespaces' fullness was not detected on time. As a result the transactions were aborted
before you had a chance to resolve the space issue. What would you do to avoid transaction failures?
A.use bigfile tablespaces (BFTs)
B.enable resumable space allocation
C.modify the background process PMON settings
D.modify the LOG_CHECKPOINT_TIMEOUT parameter
E.reduce the default tablespace usage threshold values for the database
Answer: B

Oracle   1Z0-040   1Z0-040   1Z0-040   1Z0-040

NO.10 View the exhibit and examine the sparsely populated EMP table segment.
You execute the following SQL command.
ALTER TABLE emp SHRINK SPACE;
Identify how the data in the segment will be reorganized as a result of the above statement.
A. Exhibit 1.
B. Exhibit 2.
C. Exhibit 3
D. Exhibit 4
E. Exhibit 5
Answer: A

Oracle   1Z0-040   1Z0-040인증   1Z0-040 pdf

NO.11 Which two statements regarding the Policy Framework in Enterprise Manager (EM) are correct?
(Choose two.)
A.Policy violations are prioritized as High, Medium, or Informational by category.
B.Policies can be disabled completely, or flagged as ignored, for the specified target.
C.Policies can be flagged as ignored, but never completely disabled, for the specified target.
D.Policy violations must be corrected, otherwise the database will shut down until corrective action
occurs.
Answer: AB

Oracle   1Z0-040   1Z0-040   1Z0-040자료

NO.12 An online tablespace, TEST_TBS, is full and you realize that no server-managed tablespace
threshold alerts were generated for the TEST_TBS tablespace. What could be the reason, if the
TEST_TBS tablespace does not include autoextensible data files?
A.TEST_TBS is a small file tablespace.
B.TEST_TBS is a bigfile tablespace (BFT).
C.TEST_TBS is the default temporary tablespace.
D.TEST_TBS is a dictionary-managed tablespace.
E.Threshold values for the TEST_TBS tablespace are not explicitly specified.
Answer: D

Oracle   1Z0-040자격증   1Z0-040 dumps   1Z0-040시험문제   1Z0-040자격증

NO.13 You explicitly specified the tablespace usage threshold values while creating a tablespace. You need
to revert to the database-wide default tablespace usage threshold values for the tablespace. Which
PL/SQL package would you use?
A.DBMS_STATS
B.DBMS_ALERT
C.DBMS_SPACE
D.DBMS_MONITOR
E.DBMS_SERVER_ALERT
F.DBMS_SPACE_ADMIN
Answer: E

Oracle인증   1Z0-040자격증   1Z0-040   1Z0-040

NO.14 You created a locally managed tablespace by using the following SQL statement:
CREATE TABLESPACE hr_tbs
DATAFILE 'data.dat' SIZE 1M REUSE
AUTOEXTEND ON MAXSIZE 100M;
The warning and critical tablespace usage threshold values are set to 85% and 97%, respectively. Which
two statements regarding the threshold-based alerts generation for the HR_TBS tablespace are correct?
(Choose two.)
A.A critical alert will be generated when 97 MB space is used.
B.A critical alert will be generated when 970 KB space is used.
C.A warning alert will be generated when 85 MB space is used.
D.A warning alert will be generated when 850 KB space is used.
E.A critical alert will be generated when 970 KB is left as free space.
F.A warning alert will be generated when 850 KB is left as free space.
G.No critical alert will be generated because it is a small file tablespace.
H.No warning alert will be generated because the tablespace is autoextensible.
Answer: AC

Oracle자격증   1Z0-040자료   1Z0-040

NO.15 You executed the following SQL statement to shrink the EMPLOYEES table segment stored in the
EXAMPLE tablespace:
ALTER TABLE employees SHRINK SPACE CASCADE;
Which statement is correct in this scenario?
A.The data in the segment will be compacted but the high water mark will not be adjusted.
B.The EMPLOYEES table will be changed to read-only mode during the shrink operation.
C.The indexes created on the EMPLOYEES table will need to be rebuilt after the shrink operation is over.
D.The shrink behavior will be cascaded to all dependent segments of the table that support a shrink
operation.
E.Data manipulation language (DML) operations will not be possible on the EMPLOYEES table during the
COMPACTION phase of the shrink operation.
Answer: D

Oracle   1Z0-040   1Z0-040인증   1Z0-040   1Z0-040인증

NO.16 The system was running a normal workload during the last 24 hours. You need to ensure that with the
same workload you should be able to flashback tables by three hours. What would you do to find the
system recommendations for the undo retention period and the undo tablespace size?
A.set DB_FLASHBACK_RETENTION_TARGET=10800
B.create a new scheduler window for the time period of 24 hours and use the optimizer statistics
C.modify the Automatic Workload Repository (AWR) snapshot time interval to three hours and use ADDM
findings
D.specify New Undo Retention as three hours and Analysis Time period as Last One Day in the Undo
Advisor page and use its recommendations
Answer: D

Oracle기출문제   1Z0-040 pdf   1Z0-040

NO.17 You want to perform the database backup when user activity on your system is low, such as between
12:00 a.m. and 2:00 a.m.
Which command terminates with an error if the backup is not complete at the end of the specified
duration?
A.RMAN> BACKUP DURATION 2:00 MINIMIZE LOAD DATABASE;
B.RMAN> BACKUP DURATION 2:00 PARTIAL FILESPERSET 1 DATABASE;
C.RMAN> BACKUP DURATION 2:00 PARTIAL MINIMIZE TIME DATABASE;
D.RMAN> BACKUP AS COPY DURATION 2:00 PARTIAL MINIMIZE LOAD DATABASE;
Answer: A

Oracle자료   1Z0-040자료   1Z0-040

NO.18 You plan to create an external table from the EMPLOYEES, DEPARTMENTS, and LOCATIONS
database tables. Which method or command should you use to create and populate the external table?
A.the expdp and impdp commands
B.conventional export and import
C.CREATE TABLE.. and SQL*Loader
D.CREATE TABLE.. and INSERT INTO.. SELECT.. FROM..
E.CREATE TABLE.. ORGANIZATION EXTERNAL ..AS SELECT.. FROM..
Answer: E

Oracle   1Z0-040   1Z0-040   1Z0-040   1Z0-040자격증

NO.19 You have three production databases, HRDB, FINDB, and ORGDB, that use the same ASM instance.
At the end of the day, you execute the following command on the ASM instance to shut down:
SQL> shutdown immediate;
What is the result of executing this command?
A.All the instances, including the ASM instance, are shut down in the ABORT mode.
B.The ASM instance is shut down, but the other instances are still running.
C.The ASM instance is still functional, but the other instances are shut down.
D.All the instances, including the ASM instance, are shut down in the IMMEDIATE mode.
E.HRDB, FINDB, and ORGDB instances are shut down in the ABORT mode and the ASM instance is
shut down in the IMMEDIATE mode.
F.HRDB, FINDB, and ORGDB instances are shut down in the NORMAL mode and the ASM instance is
shut down in the IMMEDIATE mode.
Answer: D

Oracle   1Z0-040 dumps   1Z0-040   1Z0-040 pdf

NO.20 View the Exhibit and examine the highlighted alert.
You have received an alert with the Category specified as Snapshot Too Old. Which page would you
open from the Advisor Central page to determine the system recommendations to avoid such alerts in
future?
A.ADDM
B.Memory Advisor
C.Segment Advisor
D.Undo Management
E.SQL Tuning Advisor
F.SQL Access Advisor
Answer: D

Oracle   1Z0-040 dump   1Z0-040

ITexamdump의 98-373덤프의 VCE테스트프로그램과 C_TADM51_70덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-274시험에 대비한 고품질 덤프와 P_HCMTM_64시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-409시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-040.html

Oracle 자격증 1Z0-147 시험덤프

IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. Oracle인증 1Z0-147시험이 아무리 어려워도ITExamDump의Oracle인증 1Z0-147덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의Oracle인증 1Z0-147덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.

ITExamDump이 바로 아주 좋은Oracle 1Z0-147인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인Oracle 1Z0-147인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는Oracle 1Z0-147인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의Oracle 1Z0-147인증시험덤프는 ITExamDump전문적으로Oracle 1Z0-147인증시험대비로 만들어진 최고의 자료입니다.

이 글을 보시게 된다면Oracle인증 1Z0-147시험패스를 꿈꾸고 있는 분이라고 믿습니다. Oracle인증 1Z0-147시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의Oracle인증 1Z0-147덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의Oracle인증 1Z0-147덤프는 고객님께서 Oracle인증 1Z0-147시험을 패스하는 필수품입니다.

최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 Oracle인증 1Z0-147덤프는IT인증시험의 한 과목인 Oracle인증 1Z0-147시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.

시험 번호/코드: 1Z0-147
시험 이름: Oracle (Oracle9i program with pl/sql)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 111 문항
업데이트: 2014-04-28

1Z0-147 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-147.html

NO.1 Examine this procedure: CREATE OR REPLACE PROCEDURE ADD_PLAYER (V_ID IN NUMBER,
V_LAST_NAME VARCHAR2) IS BEGIN INSERT INTO PLAYER (ID,LAST_NAME) VALUES (V_ID,
V_LAST_NAME); COMMIT; END; This procedure must invoke the UPD_BAT_STAT procedure and
pass a parameter. Which statement, when added to the above procedure, will successfully invoke
the UPD_BAT_STAT procedure?
A.EXECUTE UPD_BAT_STAT(V_ID);
B.UPD_BAT_STAT(V_ID);
C.RUN UPD_BAT_STAT(V_ID);
D.START UPD_BAT_STAT(V_ID);
Correct:B

Oracle   1Z0-147   1Z0-147

NO.2 This statement fails when executed: CREATE OR REPLACE TRIGGER CALC_TEAM_AVG AFTER
INSERT ON PLAYER BEGIN INSERT INTO PLAYER_BAT_STAT (PLAYER_ID,
SEASON_YEAR,AT_BATS,HITS) VALUES (:NEW.ID, 1997, 0,0); END; To which type must you
convert the trigger to correct the error?
A.row
B.statement
C.ORACLE FORM trigger
D.before
Correct:A

Oracle   1Z0-147   1Z0-147

NO.3 You need to remove the database trigger BUSINESS_HOUR. Which command do you use to
remove the trigger in the SQL*Plus environment?
A.DROP TRIGGER business_hour;
B.DELETE TRIGGER business_hour;
C.REMOVE TRIGGER business_hour;
D.ALTER TRIGGER business_hour REMOVE;
E.DELETE FROM USER_TRIGGERS WHERE TRIGGER_NAME = 'BUSINESS_HOUR';
Correct:A

Oracle   1Z0-147   1Z0-147

NO.4 Which three are valid ways to minimize dependency failure? (Choose three.)
A.querying with the SELECT * notation
B.declaring variables with the %TYPE attribute
C.specifying schema names when referencing objects
D.declaring records by using the %ROWTYPE attribute
E.specifying package.procedure notation while executing procedures
Correct:A B D

Oracle   1Z0-147   1Z0-147

NO.5 What happens during the execute phase with dynamic SQL for INSERT, UPDATE, and DELETE
operations?
A.The rows are selected and ordered.
B.The validity of the SQL statement is established.
C.An area of memory is established to process the SQL statement.
D.The SQL statement is run and the number of rows processed is returned.
E.The area of memory established to process the SQL statement is released.
Correct:D

Oracle   1Z0-147   1Z0-147

NO.6 Examine this code:
A.This function is invalid.
B.This function can be used against any table.
C.This function cannot be used in a SELECT statement.
D.This function can be used only if the two parameters passed in are not null values.
E.This function will generate a string based on 2 character values passed into the function.
F.This function can be used only on tables where there is a p_first and p_last column.
Correct:B E

Oracle   1Z0-147   1Z0-147

NO.7 Procedure PROCESS_EMP references the table EMP . Procedure UPDATE_EMP updates rows
of table EMP through procedure PROCESS_EMP . There is a remote procedure QUERY_EMP that
queries the EMP table through the local procedure PROCESS_EMP . The dependency mode is set
to TIMESTAMP in this session. Which two statements are true? (Choose two.)
A.If the signature of procedure PROCESS_EMP is modified and successfully recompiles, the EMP table
is invalidated.
B.If internal logic of procedure PROCESS_EMP is modified and successfully recompiles, UPDATE_EMP
gets invalidated and will recompile when invoked for the first time.
C.If the signature of procedure PROCESS_EMP is modified and successfully recompiles, UPDATE_EMP
gets invalidated and will recompile when invoked for the first time.
D.If internal logic of procedure PROCESS_EMP is modified and successfully recompiles, QUERY_EMP
gets invalidated and will recompile when invoked for the first time.
E.If internal logic of procedure PROCESS_EMP is modified and successfully recompiles, QUERY_EMP
gets invalidated and will recompile when invoked for the second time.
Correct:B E

Oracle   1Z0-147   1Z0-147

NO.8 Examine this code:
A.g_comm has a value of 15 at 9:06am for Smith.
B.g_comm has a value of 15 at 9:06am for Jones.
C.g_comm has a value of 20 at 9:06am for both Jones and Smith.
D.g_comm has a value of 15 at 9:03am for both Jones and Smith.
E.g_comm has a value of 10 at 9:06am for both Jones and Smith.
F.g_comm has a value of 10 at 9:03 for both Jones and Smith.
Correct:B

Oracle   1Z0-147   1Z0-147

NO.9 Examine this package:
A.The value of DISCOUNT_RATE always remains 0.00 in a session.
B.The value of DISCOUNT_RATE is set to 0.10 each time the package is invoked in a session.
C.The value of DISCOUNT_RATE is set to 1.00 each time the procedure DISPLAY_PRICE is invoked.
D.The value of DISCOUNT_RATE is set to 0.10 when the package is invoked for the first time in a
session.
Correct:D

Oracle   1Z0-147   1Z0-147

NO.10 Examine this package: CREATE OR REPLACE PACKAGE pack_cur IS CURSOR c1 IS SELECT
prodid FROM product ORDER BY prodid DESC; PROCEDURE proc1; PROCEDURE proc2; END
pack_cur; / CREATE OR REPLACE PACKAGE BODY pack_cur IS v_prodid NUMBER;
PROCEDURE proc1 IS BEGIN OPEN c1; LOOP FETCH c1 INTO v_prodid;
DBMS_OUTPUT.PUT_LINE('Row is: ' || c1%ROWCOUNT); EXIT WHEN c1%ROWCOUNT >= 3; END
LOOP; END proc1; PROCEDURE proc2 IS BEGIN LOOP FETCH c1 INTO v_prodid;
DBMS_OUTPUT.PUT_LINE('Row is: ' ||c1%ROWCOUNT); EXIT WHEN c1%ROWCOUNT >= 6; END
LOOP; CLOSE c1; END proc2; END pack_cur; / The product table has more than 1000 rows. The
SQL*Plus SERVEROUTPUT setting is turned on in your session. The product table has more than
1000 rows. The SQL*Plus SERVEROUTPUT setting is turned on in your session. The product table
has more than 1000 rows. The SQL*Plus SERVEROUTPUT setting is turned on in your session.
You execute the procedure PROC1 from SQL*Plus with the command: The product table has more
than 1000 rows. The SQL*Plus SERVEROUTPUT setting is turned on in your session. You execute
the procedure PROC1 from SQL*Plus with the command: EXECUTE pack_cur.proc1 You execute
the procedure PROC1 from SQL*Plus with the command: EXECUTE pack_cur.proc1 You execute
the procedure PROC1 from SQL*Plus with the command: EXECUTE pack_cur.proc1 What is the
output in your session? EXECUTE pack_cur.proc1 What is the output in your session? What is the
output in your session? A. ERROR at line 1: What is the output in your session? A. ERROR at line
1: A. ERROR at line 1: B. Row is:
A.ERROR at line 1:
B.Row is:
C.Row is:
D.Row is: Row is:
E.Row is: 1 Row is:
F.Row is: 1 Row is: 2
G.Row is: 1 Row is: 2 Row is: 3
H.Row is: 1 Row is: 2 Row is: 3 Row is: 2 Row is: 3
I.Row is: 4
J.Row is: 4 Row is: 5
K.Row is: 4 Row is: 5 Row is: 6 Row is: 5 Row is: 6
Correct:E F G H

Oracle   1Z0-147   1Z0-147

NO.11 Examine this code:
A.DROP gen_email_name;
B.REMOVE gen_email_name;
C.DELETE gen_email_name;
D.TRUNCATE gen_email_name;
E.DROP FUNCTION gen_email_name;
F.ALTER FUNCTION gen_email_name REMOVE;
Correct:E

Oracle   1Z0-147   1Z0-147

NO.12 Which three describe a stored procedure? (Choose three.)
A.A stored procedure is typically written in SQL.
B.By default, a stored procedure executes with the privileges of its owner.
C.A stored procedure has three parts: the specification, the body, and the exception handler part .
D.A stored procedure is stored in the database and can be shared by a number of programs.
E.A stored procedure offers some advantages over a standalone SQL statement, such as programmable
functionality and compiled code.
Correct:B D E

Oracle   1Z0-147   1Z0-147

NO.13 What can you do with the DBMS_LOB package?
A.Use the DBMS_LOB.WRITE procedure to write data to a BFILE.
B.Use the DBMS_LOB.BFILENAME function to locate an external BFILE.
C.Use the DBMS_LOB.FILEEXISTS function to find the location of a BFILE.
D.Use the DBMS_LOB.FILECLOSE procedure to close the file being accessed.
Correct:D

Oracle   1Z0-147   1Z0-147

NO.14 All users currently have the INSERT privilege on the PLAYER table. You only want your users
to insert into this table using the ADD_PLAYER procedure. Which two actions must you take?
(Choose two.)
A.GRANT SELECT ON ADD_PLAYER TO PUBLIC;
B.GRANT EXECUTE ON ADD_PLAYER TO PUBLIC;
C.GRANT INSERT ON PLAYER TO PUBLIC;
D.GRANT EXECUTE,INSERT ON ADD_PLAYER TO PUBLIC;
E.REVOKE INSERT ON PLAYER FROM PUBLIC;
Correct:B E

Oracle   1Z0-147   1Z0-147

NO.15 The add_player , upd_player_stat , and upd_pitcher_stat procedures are grouped together in a
package. A variable must be shared among only these procedures. Where should you declare this
variable?
A.in the package body
B.in a database trigger
C.in the package specification
D.in each procedure's DECLARE section, using the exact same name in each
Correct:A

Oracle   1Z0-147   1Z0-147

NO.16 You have a table with the following definition: CREATE TABLE long_tab (id NUMBER, long_col
LONG); You need to convert the LONG_COL column from a LONG data type to a LOB data type.
Which statement accomplishes this task?
A.ALTER TABLE long_tab MODIFY (LONG_COL CLOB);
B.EXECUTE dbms_lob.migrate(long_tab, long_col, clob)
C.EXECUTE dbms_manage.lob.migrate(long_tab, long_col, clob)
D.EXECUTE utl_lob.migrate(long_tab, long_col, clob)
E.EXECUTE utl_manage_lob.migrate(long_tab, long_col, clob)
Correct:A

Oracle   1Z0-147   1Z0-147

NO.17 Examine this code:
A.DML trigger
B.INSTEAD OF trigger
C.application trigger
D.system event trigger
E.This is an invalid trigger.
Correct:E

Oracle   1Z0-147   1Z0-147

NO.18 Examine this procedure: CREATE OR REPLACE PROCEDURE INSERT_TEAM (V_ID in NUMBER,
V_CITY in VARCHAR2 DEFAULT 'AUSTIN', V_NAME in VARCHAR2) IS BEGIN INSERT INTO TEAM
(id, city, name) VALUES (v_id, v_city, v_name); COMMIT; END; Which two statements will
successfully invoke this procedure in SQL*Plus? (Choose two.)
A.EXECUTE INSERT_TEAM;
B.EXECUTE INSERT_TEAM(3, V_NAME=>'LONGHORNS', V_CITY=>'AUSTIN');
C.EXECUTE INSERT_TEAM(3,'AUSTIN','LONGHORNS');
D.EXECUTE INSERT_TEAM (V_ID := 3, V_NAME := 'LONGHORNS', V_CITY := 'AUSTIN');
E.EXECUTE INSERT_TEAM (3,'LONGHORNS');
Correct:B C

Oracle   1Z0-147   1Z0-147

NO.19 You need to create a DML trigger. Which five pieces need to be identified? (Choose five.)
A.table
B.DML event
C.trigger body
D.package body
E.package name
F.trigger name
G.system event
H.trigger timing
Correct:A B C F H

Oracle   1Z0-147   1Z0-147

NO.20 Examine this package:
A.one
B.two
C.three
D.four
E.five
F.none
Correct:F

Oracle   1Z0-147   1Z0-147

ITexamdump의 NS0-155덤프의 VCE테스트프로그램과 P2090-010덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 100-101시험에 대비한 고품질 덤프와 LOT-404시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-730시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-147.html

Oracle 1Z1-403 덤프데모

Oracle인증 1Z1-403시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Oracle인증 1Z1-403시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Oracle인증 1Z1-403덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Oracle 1Z1-403시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에Oracle 1Z1-403인증시험을 패스함을 보장 드립니다.

Oracle인증 1Z1-403시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. Oracle인증 1Z1-403시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의Oracle인증 1Z1-403는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. Oracle인증 1Z1-403덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.

ITExamDump의Oracle인증 1Z1-403덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의Oracle인증 1Z1-403덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? Oracle인증 1Z1-403덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

시험 번호/코드: 1Z1-403
시험 이름: Oracle (Enterprise Linux System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 115 문항
업데이트: 2014-04-28

우리 ITExamDump 에는 최신의Oracle 1Z1-403학습가이드가 있습니다. ITExamDump의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의Oracle 1Z1-403합습자료로Oracle 1Z1-403인증시험을 응시하실 수 있습니다.Oracle 1Z1-403인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리ITExamDump의Oracle 1Z1-403자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리ITExamDump의 제품의 중요함과 정확함을 증명하였습니다.

1Z1-403 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z1-403.html

NO.1 You have trouble in booting the Linux system and want to troubleshoot it. To find the cause, you want to
make the kernel start the bash program in place of init.
What would you do to achieve this objective? (Choose all that apply.)
A. Pass S as the kernel parameter to the grub menu.
B. Pass 1 as the kernel parameter to the grub menu.
C. Pass init=/bin/bash as the kernel parameter to the grub menu.
D. Pass INIT=/sbin/bash as the kernel parameter to the grub menu.
Answer: C

Oracle dumps   1Z1-403자료   1Z1-403   1Z1-403인증   1Z1-403 pdf

NO.2 You want to install the ieee80211 module on your Linux system. While building the module, you receive
the following error:
Make [2]: *** [ieee 80211-1.2.17/ieee80211_module.o] Error 1
Make [1]: *** [_module_/ieee80211-1.2.17] Error 2
Make [1]: Leaving directory '/usr/src/kernels/2.6.9-42.0.0.0.1.EL-i686'
Make: *** [modules] Error 2
What do you infer from this error?
A. The ieee80211 module conflicts with the current kernel version.
B. The dependency modules for ieee80211 are not installed on the system.
C. The ieee80211 module given is not supported by the machine architecture.
D. The kernel source package, which must be installed to compile external device drivers, is not installed
on the system.
Answer: D

Oracle자료   1Z1-403인증   1Z1-403

NO.3 You work for XYZ organization and are setting up a new Linux box. The organization wants the user's
data on the system to be safe even in the event of a crash of the root filesystem.
Which step do you think would help the administrator achieve the organization's objective?
A. Have /opt directory on its own filesystem with the filesystem being ext3.
B. Have /home directory on its own filesystem with the filesystem being ext3.
C. Have /var directory on its own filesystem and all other filesystems under / (root filesystem).
D. Have /usr directory on its own filesystem and all other filesystems under / (root filesystem).
Answer: B

Oracle   1Z1-403   1Z1-403기출문제   1Z1-403자격증   1Z1-403

NO.4 The organization you work for wants to set up a new machine with Oracle Enterprise Linux and has
three requirements:
1. The filesystem should be consistent.
2: The old data should not reappear in the files after an unclean shutdown.
3: The filesystem data should be written to the disk before metadata.
In order to meet these requirements, you have set the ext3 journaling mode as data=writeback.
Which requirements have you met?
A. only 1
B. only 2
C. only 3
D. both 1and 3
E. both 2 and 3
F. both 1 and 2
G. All the three requirements are met.
Answer: A

Oracle   1Z1-403최신덤프   1Z1-403자격증   1Z1-403   1Z1-403   1Z1-403 dumps

NO.5 You are installing Oracle Enterprise Linux in the Graphical User Interface(GUI) mode on your machine
and are at the package group selection panel. You do not want to customize the packages to be installed.
Therefore, select the option "install default software packages."
Which three packages would be in the default selection group? (Choose three.)
A. GNOME
B. Webserver
C. System Tools
D. Printer Support
E. Windows File Server (SMB)
Answer: ABE

Oracle   1Z1-403   1Z1-403   1Z1-403자료   1Z1-403

NO.6 Which two statements correctly define Virtual Network Computing (VNC)? (Choose two.)
A. It is a client/server application.
B. It does not provide any protection to remote X connections.
C. It allows entire desktops to be displayed and controlled remotely.
D. It is used to connect to a remote Linux machine only from a Linux machine.
Answer: AC

Oracle시험문제   1Z1-403자료   1Z1-403   1Z1-403   1Z1-403

NO.7 You are in runlevel 5 working at the tty1 terminal on server1. To configure the gdm display manager,
you issue the following command but this results in an error as shown below:
[root@server1]#gdmsetup
(gdmsetup:6326): Gtk-WARNING **: cannot open display:
What could be the reason for the error?
A. The /etc/inittab file is corrupted.
B. The Xserver on the system is not running.
C. The xfs service is not running on the system.
D. The runlevel in the /etc/inittab file is missing.
E. The command only works in a graphical environment.
Answer: E

Oracle pdf   1Z1-403 pdf   1Z1-403

NO.8 Identify two true statements about Virtual Network Computing (VNC). (Choose two.)
A. It is a client/server application.
B. It allows entire desktops to be displayed remotely.
C. It does not provide any protection to remote X connections.
D. It allows applications to be run remotely and displayed only locally.
E. It is used to connect to a remote Linux machine only from a Linux machine.
Answer: AB

Oracle인증   1Z1-403   1Z1-403 dumps

NO.9 The user smith executed the mozilla command, located in /usr/bin and owned by the root user.
Which two statements are true? (Choose two.)
A. When mozilla needs to access certain files, the access would be determined by root's permissions.
B. When started by smith, smith would own the initial mozilla program and all processes started by the
initial process.
C. When mozilla needs to access certain files, the access would be determined by smith's permissions
and not by root's.
D. When started by the user smith, the user smith would own the initial mozilla program and all processes
started by the initial process would be owned by the system user associated with mozilla.
Answer: BC

Oracle최신덤프   1Z1-403   1Z1-403 dumps   1Z1-403   1Z1-403시험문제   1Z1-403 dumps

NO.10 You are installing Oracle Enterprise Linux on a machine and are at the stage of swap filesystem
creation. You want to ensure that swap contains twice the amount of RAM available in the system but do
not know the total available memory.
You can use the free command but do not have a prompt to execute the command. Which key
combination would take you to a command prompt?
A. [Ctrl]+[Alt]+[F2]
B. [Ctrl]+[Alt]+[F3]
C. [Ctrl]+[Alt]+[F4]
D. [Ctrl]+[Alt]+[F1]
Answer: A

Oracle최신덤프   1Z1-403 dumps   1Z1-403 pdf   1Z1-403   1Z1-403   1Z1-403기출문제

NO.11 You have server1 configured as the Virtual Network Computing (VNC) server. There is no firewall
between server1 and station1. You have logged on to station1 as root and want to connect to server1
using VNC. You issue the following command:
[root@station1]# vncviewer server1.2
Which statement is true?
A. server1 provides an encrypted connection to station1.
B. The xinetd service on station1 is not mandatory for the VNC connection.
C. The desktop of server1 is shared with station1 without prompting for a password.
D. station1 is prompted for a password and the desktop of server1 is shared with station1 only when the
correct password is entered.
Answer: D

Oracle   1Z1-403덤프   1Z1-403자료   1Z1-403   1Z1-403   1Z1-403

NO.12 During the installation of Oracle Enterprise Linux, you want to customize the packages to be installed.
You select one of the package groups that has both base and optional packages.
Which statement about the packages is true?
A. Only the optional packages would be installed.
B. All the base packages and the optional packages would be installed.
C. The selection of a base package does not depend on an optional package.
D. Only the base packages and the auto selected optional packages would be installed.
Answer: D

Oracle시험문제   1Z1-403 dumps   1Z1-403   1Z1-403 dumps   1Z1-403

NO.13 You are logged in to server1 and want to allow remote connections to server1 through X Display
Manager Control Protocol (XDMCP). You change the entry "Enable=false" to "Enable=true" in the
"[xdmcp]" section of the gdm.conf configuration file.
To test the XDMCP configuration, you log in to station1 as smith and try to connect to server1 by using the
following command:
[smith@station1]$ X -query server1.example.com :1
What is the result?
A. A connection to the gdm display manager on server1.example.com would be established using direct
XDMCP.
B. A connection to the xdm display manager on server1.example.com would be established using direct
XDMCP.
C. A connection to the gdm display manager on server1.example.com would be established using indirect
XDMCP.
D. A connection to the xdm display manager on server1.example.com would be established using indirect
XDMCP.
Answer: A

Oracle   1Z1-403   1Z1-403   1Z1-403인증   1Z1-403자료

NO.14 Which two statements are true about an X server? (Choose two.)
A. Multiple X servers can be run on the same host.
B. The first X server on a remote host listens on port 6000.
C. The first X server on a remote host listens on port 6001.
D. Only a single X server can run on a machine at any given point of time.
Answer: AB

Oracle   1Z1-403시험문제   1Z1-403   1Z1-403   1Z1-403인증

NO.15 As an administrator, you execute the following command to verify the integrity of mysql:
[root@server1]#rpm -Va mysql
S.5....T c /etc/my.cnf
What attributes of the /etc/my.cnf file have changed?
A. The permissions, user ownership, and file type have changed.
B. The permissions, group ownership, and file type have changed.
C. The user ownership, group ownership, and file type have changed.
D. The MD5 signature, file size, and modification time have changed.
Answer: D

Oracle자격증   1Z1-403 dumps   1Z1-403

NO.16 You are downloading a text file from the Web into a directory on an ext2 filesystem. The system crash
after the data blocks are written onto the disk but before the metadata is written.
What is the status of the file after this transaction?
A. The file contents can be seen only using the cat command.
B. The file can be accessed using only the vi editor and does not require to be repaired using fsck.
C. The file cannot be accessed and must be repaired using fsck inorder to access the file contents.
D. The file contents can be accessed using only the emacs text editor and does not require to be repaired
using fsck .
Answer: C

Oracle   1Z1-403덤프   1Z1-403시험문제   1Z1-403덤프   1Z1-403시험문제

NO.17 Being the system administrator for XYZ corporation, you have been given the task of setting up a new
Linux box.
The new machine has to meet the following criteria:
1. There should be a provision for expanding one filesystem without affecting the other filesystems.
2: The user data should be safe in the event of root file system crash.
3: The filesystems should support journaling.
Which three actions must you take to meet all the requirements? (Choose three.)
A. Use ext3 as the filesystem.
B. Use ext2 as the filesystem.
C. Have the /usr/ directory on its own filesystem.
D. Have the /home/ directory on its own filesystem.
E. Separate the directory structure across multiple partitions.
Answer: ADE

Oracle   1Z1-403 pdf   1Z1-403   1Z1-403자격증   1Z1-403   1Z1-403

NO.18 You want to make Oracle Enterprise Linux coexist with Microsoft Windows on your machine. You
install Oracle Enterprise Linux first with the default boot loader configuration and then install Microsoft
WindowsXP. You reboot the system after installation and the system boots directly into the Windows
operating system without showing the Grand Unified Boot Loader (GRUB) menu.
Which two steps could you have taken to avoid this situation? (Choose two.)
A. Install Oracle Enterprise Linux first with the boot loader on MBR and then install Microsoft WindowsXP.
B. Install Microsoft WindowsXP first and then install Oracle Enterprise Linux with the boot loader on
Master Boot Record (MBR).
C. Install Microsoft WindowsXP first and then install Oracle Enterprise Linux with the boot loader at the
first sector of the /boot partition.
D. Install Oracle Enterprise Linux first with the boot loader at the first sector of the /boot partition and then
install Microsoft WindowsXP.
Answer: BC

Oracle   1Z1-403   1Z1-403자격증   1Z1-403   1Z1-403   1Z1-403자료

NO.19 Match the following scripts and their applicability:
1. ./.xinitrc a) applies if X is started directly, or if ./.xsession does not exist and X is started viaa display
manager
2) ./.xsession b) applies when X is started directly
3) ./.Xclients c) applies when X is started from a display manager
A. 1-b, 2-a, 3-c
B. 1-b, 2-c, 3-a
C. 1-a, 2-b, 3-c
D. 1-a, 2-c, 2-b
Answer: B

Oracle인증   1Z1-403   1Z1-403인증   1Z1-403   1Z1-403자격증

NO.20 Which three statements are true about the Linux swap file system? (Choose three.)
A. The Linux user data cannot be written to the Linux swap space.
B. High-priority swap spaces would be exhausted only after exhausting swap spaces with equal priorities.
C. The Linux kernel code and data are not swappable and are never moved to swap file system from
physical memory.
D. If too much space is allocated for swap, errant programs may run for an extended time and use up
RAM and swap space.
E. When most of the system's real memory is in use, and there is a need for more, some data would be
moved into the swap file system to free real RAM memory for use by applications or for kernel use, such
as for driver buffers, files, or network packets.
Answer: CDE

Oracle기출문제   1Z1-403   1Z1-403덤프   1Z1-403

NO.21 You have a /dev/md1 redundant array of independent disks (RAID) array on your system as shown
below:
[root@server1 ~]# cat /proc/mdstat
Personalities : [raid 5]
md1 : active raid5 sdd1[3] sdc1[1] sdb1[0]
594176 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
unused devices:
The /dev/md1 RAID array is mounted on /data. You issued the command:
mdadm --fail /dev/md1 /dev/sdc1 /dev/sdb1
Which statements are true about the RAID array after you issue this command? (Choose all that apply.)
A. The kernel would report a Buffer I/O error on the RAID device /dev/md1.
B. The RAID array would be destroyed but the data could be recovered from the RAID disks.
C. The RAID array would be completely destroyed including the super block of the file system.
D. The RAID array could be reconstructed using new RAID partitions that synchronize with the /dev/sdd1
disk partition.
Answer: AC

Oracle   1Z1-403 pdf   1Z1-403   1Z1-403시험문제

NO.22 The system you logged in is running in runlevel 5. You want to customize X and want to have a
consistent environment regardless of how X is started.
Which step is recommended?
A. Delete the ~/.Xclients file and use the ~/.xinitrc file.
B. Delete ~/.Xclients and ~/.xsession and use the ~/.xinitrc file.
C. Delete ~/.xinitrc and ~/.xsession and use the ~/.Xclients file.
D. Delete ~/.xinitrc and ~/.Xclients and use the ~/.xsession file.
E. Delete the ~/.Xclients file and use both ~/.xinitrc and ~/.xsession files.
Answer: C

Oracle기출문제   1Z1-403   1Z1-403덤프   1Z1-403자료   1Z1-403   1Z1-403

NO.23 You want to configure the display login program to display the face browser of user accounts for
system logon.
Which two display managers support this feature? (Choose two.)
A. gdm
B. kdm
C. twm
D. xdm
Answer: AB

Oracle자격증   1Z1-403   1Z1-403덤프   1Z1-403 dump

NO.24 To find the value of the DISPLAY environment variable, you issue the following command:
[rooot@server1]#echo $DISPLAY
0
[rooot@server1]#
What do you interpret from the environment variable's value?
A. Graphical applications would make a local UNIX socket connection.
B. Graphical applications would make a remote UNIX socket connection.
C. Graphical applications would make the first network connection to TCP port 6001.
D. Graphical applications would make the second network connection to TCP port 6000.
Answer: A

Oracle dump   1Z1-403시험문제   1Z1-403

NO.25 You are currently working in runlevel 3. The X server is configured correctly and the default runlevel is
set to 5 in the /etc/inittab file. To find the default desktop you issue the following command:
[root@server1]#cat /etc/sysconfig/desktop
[root@server1]#
You find the file empty. What will be the effect when you try to go to the runlevel 5?
A. The system defaults to kdm and launch KDE.
B. The system defaults to xdm and launch GNOME.
C. The system defaults to gdm and launch GNOME
D. The system will fail to log into the graphical mode.
Answer: C

Oracle   1Z1-403   1Z1-403   1Z1-403   1Z1-403 dump

NO.26 You have bound your system to the Network Information Service (NIS) domain ORACLE and all
client-side configurations are done. The users report a problem that they are not able to log in through
NIS accounts, whereas local users are successfully authenticated, after the system reboots.
As a Linux administrator, you executed the nisdomainname command and you get the output "(none)",
and no traces of yp are found in the /var/log/messages file.
What would you do to resolve this error? (Choose all that apply.)
A. Re-create the NIS domain on the server that runs the NIS domain ORACLE.
B. Restart the ypserv service on the server that runs the NIS domain ORACLE.
C. Restart the network service on the server that runs the NIS domain ORACLE.
D. Use the chkconfig command to set the ypbind service to be on at the desired runlevels.
E. Use the ntsysv command to select the ypbind service to be automatically started with the desired
runlevels.
Answer: DE

Oracle   1Z1-403자격증   1Z1-403   1Z1-403   1Z1-403인증

NO.27 You are installing Oracle Enterprise Linux in the Graphical User Interface (GUI) mode on your
machine. From the package selection screen, you select one of the package groups.
Which two statements are NOT true in this context? (Choose two.)
A. Only the optional packages would be installed.
B. All the optional packages are also installed along with the package group.
C. Both the base packages and all the optional packages would be installed.
D. The selection of a base package does not depend on an optional package.
E. Only the base packages and the auto-selected optional packages would be installed.
Answer: AB

Oracle   1Z1-403기출문제   1Z1-403   1Z1-403인증   1Z1-403

NO.28 While importing user accounts in bulk along with passwords using the newusers command, you noticed
that user passwords are saved in the /etc/shadow file in the crypt format.
How would you enable the newusers command to use the preferred MD5 format when writing passwords
to the /etc/shadow file?
A. Add the MD5_ENAB=yes line to the /etc/login.defs file.
B. Add the MD5_CRYPT yes line to the /etc/login.defs file.
C. Add the MD5_CRYPT_ENAB yes line to the /etc/login.defs file.
D. Add the MD5_CRYPT_ENAB yes line to the /etc/security/limits.conf file.
Answer: C

Oracle pdf   1Z1-403   1Z1-403 dumps

NO.29 You have the default syslogd configuration in your system. You plugged in a USB keydrive into the
system.
Which command would help you to find the bus and the device number of the keydrive?
A. lsusb
B. lsmod
C. insmod
D. cat /proc/self/mounts
Answer: A

Oracle시험문제   1Z1-403인증   1Z1-403자료   1Z1-403덤프   1Z1-403

NO.30 You have written a udev rule as shown below:
KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
KERNEL=="fd[0-9]*", OWNER="john"
Which two statements are true? (Choose two.)
A. The user john would own all the floppy devices.
B. The user john would own all the floppy and frame buffer devices.
C. The video group on the system would own all the floppy devices.
D. The video group on the system could be controlled by john only.
E. The video group on the system would own all the frame buffer devices.
Answer: AE

Oracle   1Z1-403   1Z1-403인증   1Z1-403   1Z1-403

ITexamdump의 C_TADM51_70덤프의 VCE테스트프로그램과 C_HANAIMP131덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-832시험에 대비한 고품질 덤프와 642-242시험 최신버전덤프를 제공해드립니다. 최고품질 200-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z1-403.html