Dell DC0-261 인증시험

IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. Dell인증 DC0-261시험이 아무리 어려워도ITExamDump의Dell인증 DC0-261덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의Dell인증 DC0-261덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.

ITExamDump에서 Dell인증 DC0-261덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Dell인증 DC0-261덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.

Dell인증 DC0-261시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Dell인증 DC0-261시험문제에 대비하여 제작한Dell인증 DC0-261덤프가 있다는 것을 모르고 있기때문입니다. Dell인증 DC0-261시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Dell인증 DC0-261덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.

우선 우리ITExamDump 사이트에서Dell DC0-261관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Dell DC0-261덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.

IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Dell인증 DC0-261덤프로Dell인증 DC0-261시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.

시험 번호/코드: DC0-261
시험 이름: Dell (Dell Storage Networking Professional Exam - Version 2)

DC0-261 덤프무료샘플다운로드하기: http://www.itexamdump.com/DC0-261.html

NO.1 Which two tasks can Navisphere Analyzer perform? (Choose two.)
A. comparing archived and real-time performance data
B. tracking performance trends for Dell / EMC switches
C. tracking performance trends for Dell / EMC storage arrays
D. tracking performance trends for hosts connected to Dell / EMC Storage Area Networks (SANs)
Answer: AC

Dell   DC0-261   DC0-261최신덤프   DC0-261

NO.2 Which statement best describes bi-directional mirroring as implemented by MirrorView ?
A. By utilizing two storage systems, a single storage system can be configured as the primary for one
mirror and a secondary for another mirror.
B. By utilizing two storage systems and one tape drive, the two storage systems are configured as a
primary and the secondary is backed up to tape.
C. By utilizing two storage systems, a single storage system is configured as the primary and the other
storage system is configured as the secondary.
D. By utilizing three storage systems, the two storage systems are configured as a primary and the third
storage system is configured as a secondary that is used to store the primary images.
Answer: A

Dell자격증   DC0-261   DC0-261덤프   DC0-261인증   DC0-261

NO.3 What steps should you perform to create a copy of a source LUN in a second storage array, while
minimizing unavailability of the source LUN?
A. use SAN Copy to copy the source LUN, then take a snapshot on the second storage array
B. take a snapshot of the source LUN, then use SAN Copy to copy the snapshot to the second storage
array
C. take a snapshot of the source LUN, then use SAN Copy to copy the source LUN to the second storage
array
D. take a snapshot of the source LUN, run MirrorView to mirror the snapshot to the second array, then
use SAN Copy to synchronize the mirror with the source LUN
Answer: B

Dell자격증   DC0-261시험문제   DC0-261인증   DC0-261 dumps   DC0-261

NO.4 How many LUNs are required for the Clone Private LUN?
A. one per SP
B. one per clone
C. one per clone group
D. one per storage system
Answer: A

Dell최신덤프   DC0-261   DC0-261

NO.5 Which two states can a clone LUN be in before it can be fractured? (Choose two.)
A. consistent
B. synchronizing
C. synchronized
D. reverse out-of-sync
Answer: AC

Dell pdf   DC0-261 dump   DC0-261   DC0-261 dump   DC0-261 dumps

NO.6 You want User1 to have Administrator access to storage system A that is located in a branch office.
However, you want User1 to have read-only access to the remaining storage systems within the domain.
Which scenario best accomplishes this task?
A. User accounts must be either global or local because the user inherits the most restrictive role
assigned to the user.
B. Create a local account with Administrator access on storage system A, then create a global account for
User1 with Monitor access.
C. Create a global account with Monitor access on storage system A, then modify the account policy to
allow User1 to administer only storage system A.
D. Create a global account with Monitor access on the master node, then have User1 log in to storage
system A using the local default manager account.
Answer: B

Dell   DC0-261   DC0-261 pdf

NO.7 Which utility should you use to add LUN management functionality to a server when using SAN Copy?
A. naviadm
B. admhost
C. admcopy
D. admsnap
Answer: B

Dell   DC0-261최신덤프   DC0-261시험문제

NO.8 Which three statements are correct about using SnapView? (Choose three.)
A. Snapshots can take mere seconds to create.
B. Snapshots may be created using the admhost CLI utility.
C. SnapView can take snapshots, or point-in-time copies of LUNs.
D. SnapView can make clones, or 100% duplicate copies of a LUN.
E. Snapshots are volume-level and thus able to restore specific files.
Answer: ACD

Dell   DC0-261   DC0-261 pdf   DC0-261인증

NO.9 Which four LUN characteristics can be displayed in Navisphere Analyzer? (Choose four.)
A. Bytes Tx / Rx
B. Utilization (%)
C. Capacity (GB)
D. Response Time (ms)
E. Total Bandwidth (MB/sec.)
F. Total Throughput (I/O /sec.)
Answer: BDEF

Dell자격증   DC0-261   DC0-261덤프   DC0-261

NO.10 How are the LUNs for the Write Intent Log (WIL) configured?
A. WIL LUNs are configured automatically.
B. After manually binding the LUNs, the WIL is automatically configured.
C. WIL LUNs must be manually bound and allocated on a per-array basis.
D. WIL LUNs must be manually bound and allocated on one array. The WIL is then automatically
replicated to the other array.
Answer: C

Dell   DC0-261최신덤프   DC0-261   DC0-261

NO.11 Which three statements are correct about SAN Copy? (Choose three.)
A. SAN Copy can be installed on any model CX array.
B. SAN Copy is a storage array-based Data Mover application.
C. SAN Copy transfers data over a Fibre Channel SAN, as opposed to an IP LAN.
D. SAN Copy sessions can be managed either by Navisphere Manager or by CLI.
Answer: BCD

Dell시험문제   DC0-261기출문제   DC0-261인증   DC0-261

NO.12 You have installed SAN Copy. Which statement is true?
A. The storage array must be rebooted.
B. SAN Copy cannot be upgraded, except by a complete re-install.
C. Any LUN within the SAN is automatically made available to be copied.
D. The admhost utility must be installed on each storage array that Navisphere Manager resides on.
E. SAN Copy sessions can be managed through the Navisphere Manager Enterprise Storage window.
Answer: E

Dell인증   DC0-261   DC0-261   DC0-261   DC0-261

NO.13 Which three statements are correct about clones? (Choose three.)
A. Clones can be copied using SAN Copy to a remote storage array.
B. Clones typically consume about 20% of the size of the source LUN.
C. Fractured clones can later be synchronized with the source LUN to update the contents.
D. Clones can be fractured from the source LUN, then mounted to a secondary host and accessed just
like another LUN.
Answer: ACD

Dell시험문제   DC0-261시험문제   DC0-261   DC0-261인증

NO.14 You want to implement site level disaster recovery. Which two are valid options to consider? (Choose
two.)
A. Use SAN Copy to copy LUNs from the primary site to the recovery site.
B. Use SAN Copy to mirror a LUN from the primary site to the recovery site.
C. Use MirrorView to mirror LUNs from the primary site to another local array.
D. Use SnapView to create a clone, then use SAN Copy to copy the clone to the recovery site.
Answer: AD

Dell   DC0-261시험문제   DC0-261기출문제   DC0-261   DC0-261

NO.15 You have a source LUN on a CX500 for which you maintain snapshots for tape backup. You need to
create a new snapshot for this source LUN but are unable to do so. You can create snapshots of other
source LUNs on the array. What is the most likely problem?
A. You have reached the maximum limit of 50 Cache LUNs.
B. You have reached the maximum limit of 8 snapshots per source LUN.
C. You have reached the maximum limit of 150 snapshots per storage system.
D. You have reached the maximum limit of 300 snapshots per storage system.
Answer: B

Dell자격증   DC0-261   DC0-261   DC0-261 dump

NO.16 You are concerned that the loss of an SP might cause you to lose all of your existing snapshot
sessions. What should you do to prevent losing existing snapshot sessions?
A. add a UPS to the storage array
B. use PowerPath to gain failover support
C. select the Persistent mode when starting a snapshot session
D. Nothing, the Vaulting process automatically saves all snapshots to disk in the PSM LUN.
Answer: C

Dell자격증   DC0-261자료   DC0-261   DC0-261   DC0-261   DC0-261

NO.17 Which three operations are possible using clones? (Choose three.)
A. Up to eight clones can be made from a single source LUN.
B. While a clone is fractured, it can be connected to a host for use.
C. A fractured clone can be accessed for read and write operations.
D. A snapshot of a clone must be reverse synchronized prior to mounting.
E. A live clone can be mounted by a secondary host to use as a standard LUN.
Answer: ABC

Dell   DC0-261   DC0-261덤프   DC0-261 dumps

NO.18 You are connecting a CX700 to a CX500 through a fabric for Mirrorview. Which two zones must be
completed? (Choose two.)
A. Port 1 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
B. Port 1 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
C. Port 3 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
D. Port 3 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
Answer: CD

Dell자료   DC0-261 dumps   DC0-261덤프   DC0-261   DC0-261자료   DC0-261자료

NO.19 SAN Copy sessions offer which three capabilities? (Choose three.)
A. providing content push or pull capability
B. offloading Storage Array processing onto hosts
C. migrating data from older arrays to newer arrays in the same SAN fabric
D. distributing and collecting content between the central location and branch offices
Answer: ACD

Dell자료   DC0-261인증   DC0-261   DC0-261인증

NO.20 Which two are examples of how SnapView can be used in conjunction with MirrorView? (Choose two.)
A. SnapView can be used to take a snapshot of the remote mirror for use at the remote site.
B. SnapView can be used to take a snapshot of the remote mirror and then back up the snapshot to tape.
C. SnapView can be used to take a snapshot of the primary mirror and then mirror the snapshot to the
remote site.
D. SnapView can be used to take a snapshot of the remote mirror and then clone the snapshot for use at
the primary site.
Answer: AB

Dell   DC0-261 dump   DC0-261   DC0-261자료

요즘같이 시간인즉 금이라는 시대에, 우리 ITExamDump선택으로Dell DC0-261인증시험응시는 아주 좋은 딜입니다. 우리는 100%시험패스를 보장하고 또 일년무료 업데이트서비스를 제공합니다. 그리고 시험에서 떨어지셨다고 하시면 우리는 덤프비용전액 환불을 약속 드립니다.