It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이Microsoft 070-462를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.Microsoft 070-462은 그만큼 아주 어려운 시험입니다. 그래도Microsoft 070-462인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.
ITExamDump의 Microsoft인증 070-462덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Microsoft인증 070-462덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Microsoft인증 070-462로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
시험 번호/코드: 070-462
시험 이름: Microsoft (Administering Microsoft SQL Server 2012 Databases)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2013-11-27
ITExamDump는 유일하게 여러분이 원하는Microsoft인증070-462시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.
만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Microsoft 070-462인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
ITExamDump는 많은 IT인사들이Microsoft인증시험에 참가하고 완벽한070-462인증시험자료로 응시하여 안전하게Microsoft 070-462인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.ITExamDump는 100% 한번에 꼭 고난의도인Microsoft인증070-462시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.
070-462 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-462.html
NO.1 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
B. Perform a partial restore.
C. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
D. Perform a point-in-time restore.
E. Restore the latest full backup.
F. Perform a page restore.
G. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft 070-462자료 070-462시험문제
NO.2 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
The differential backup of the reporting database fails. Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
B. Perform a point-in-time restore.
C Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
E. Restore the latest full backup. Then, restore the latest differential backup.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a page restore.
H. Perform a partial restore.
Answer: C
Microsoft 070-462 070-462
NO.3 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if
any of the servers fail. You also need to minimize the amount of storage used by the database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.SQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.SQL Server that includes an application database configured to perform snapshot replication
H.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: H
Microsoft 070-462 070-462 070-462 dump
NO.4 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be
off-loaded from the primary database to another server. You also need to be able to add indexes to the
secondary database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.SQL Server that includes an application database configured to perform transactional replication
G.SQL Server that includes an application database configured to perform snapshot replication
HTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: F
Microsoft 070-462인증 070-462
NO.5 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on
the transactional database. You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Perform a point-in-time restore.
D. Restore the latest full backup.
E. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
F. Perform a page restore.
G. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: F
Microsoft 070-462 070-462 070-462인증
NO.6 You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis.
Which configuration should you use?
A.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
BSQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
DTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.SQL Server that includes an application database configured to perform snapshot replication
F.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
Answer: E
Microsoft인증 070-462 070-462
NO.7 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on
the reporting database.
You need to ensure that the databases are restored. You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
E. Perform a page restore.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a point-in-time restore.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft자료 070-462 070-462자격증 070-462 dumps 070-462 070-462 dumps
NO.8 You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs. Your primary replica is available at
Server01\Contoso01.
You need to configure the availability group to have the highest availability. You also need to ensure that
no data is lost.
Which Transact-SQL statement should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Microsoft 070-462 070-462 070-462인증 070-462
NO.9 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?
A.SQL Server that includes an application database configured to perform transactional replication
B.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.SQL Server that includes an application database configured to perform snapshot replication
E.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
Answer: A
Microsoft최신덤프 070-462 pdf 070-462덤프 070-462덤프
NO.10 DRAG DROP
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC.
ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
ITexamdump의 312-50v8덤프의 VCE테스트프로그램과 IIA-CFSA덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Y0-A28시험에 대비한 고품질 덤프와 LOT-407시험 최신버전덤프를 제공해드립니다. 최고품질 00M-622시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기