최근 EMC인증 E20-816시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고EMC인증 E20-816시험에 도전해보세요. ITExamDump 의 EMC인증 E20-816덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. EMC인증 E20-816덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.
만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로EMC인증E20-816험을 패스하실 수 있습니다,
EMC인증 E20-816시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신EMC인증 E20-816시험에 대비한EMC인증 E20-816덤프를 발췌하였습니다. EMC인증 E20-816덤프는EMC인증 E20-816시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 EMC인증 E20-816덤프를 추천합니다.
ITExamDump는 여러분이 EMC인증E20-816시험 패스와 추후사업에 모두 도움이 되겠습니다.ITExamDump제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. EMC인증E20-816 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이EMC인증E20-816시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump EMC인증E20-816인증시험자료는 100% 패스보장을 드립니다
EMC E20-816인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.
EMC 인증 E20-816시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
시험 번호/코드: E20-816
시험 이름: EMC (Symmetrix Solutions Expert Exam for Technology Architects)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 156 문항
업데이트: 2013-12-17
ITExamDump 의 EMC인증 E20-816시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. EMC인증 E20-816시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 EMC인증 E20-816덤프만으로도 가능합니다. 수많은 분들이 검증한EMC인증 E20-816덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.
E20-816 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-816.html
NO.1 An Open Replicator data migration from a HDS to Symmetrix array is being proposed. The customer
has the following requirements: Application downtime should be minimal and Open Replicator session
failure must not result in data loss
Which solution will meet the customer's requirements?
A. Cold pull with precopy
B. Cold pull with donor update
C. Hot pull with donor update
D. Hot pull with precopy
Answer: C
EMC덤프 E20-816인증 E20-816 pdf E20-816최신덤프
NO.2 A customer is migrating their Windows 2008 servers from HP storage to EMC V-Max storage.
Host-based performance metrics need to be used to design a configuration. EMC recommends the
diskperf -Y command to enable I/O statics in every server.
Why is enabling disk statistics collection recommended?
A. It improves performance of the servers
B. Otherwise, a reboot will be required to activate
C. Otherwise, you must start Performance Monitor
D. Because Windows 2008 leaves the default value to off
Answer: B
EMC dump E20-816기출문제 E20-816 E20-816 E20-816 E20-816 dumps
NO.3 A customer is implementing a new SRDF/S environment with DMX arrays. The primary and secondary
data centers are 20 kilometers apart.
Which consideration is needed for planning, designing, and implementing a synchronous solution?
A. Ensure that the application can tolerate the additional latency
B. Ensure that adequate cache on the arrays is allocated
C. Ensure that the RAID configuration is identical on both arrays
D. Ensure that there is twice the recommended amount of bandwidth
Answer: A
EMC E20-816 E20-816 dump E20-816최신덤프
NO.4 A customer's application is stored on a DMX-4. The application runs 24x7x365. They would like to send
consistent replicas of this data simultaneously to four branch offices on a nightly basis. The branch offices
have CLARiiON arrays.
Which solution would you recommend?
A. Use TimeFinder/Mirror to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data from the BCVs to the remote offices.
B. Use Open Replicator cold push to replicate the data to the remote offices.
C. Use Open Replicator hot push to replicate the data to the remote offices.
D. Use TimeFinder/Snap to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data on the VDEVs to the remote offices.
Answer: A
EMC자료 E20-816 E20-816 E20-816 pdf E20-816시험문제
NO.5 A customer wants to migrate from DMX-3 with 5772 to DMX-4 with 5773 code. They are using
TimeFinder/Clone every night for backup processing with synchronous COFW. TimeFinder/Clone with
5773 allows them to use a new feature called asynchronous COFW.
How many back-end operations does TimeFinder/Clone make with Enginuity 5773 using Aynchronous
COFW compared with TimeFinder/Clone with Enginuity 5772?
A. Back-end operations are lower with 5773 Enginuity.
B. Back-end operations are the same in both Enginuity versions.
C. Back-end operations are higher with 5773 Enginuity.
D. Depends on disk speed and RAID protection.
Answer: B
EMC인증 E20-816기출문제 E20-816
NO.6 A customer is planning to implement SRDF/S into their environment. The customer wants zero data
loss if they lose their primary data center (R1). The distance is 1,000 miles, and the customer would like to
maintain an application response time of 10 ms.
Which design would you implement?
A. SRDF/AR single-hop
B. SRDF/AR multi-hop
C. SRDF/DM
D. SRDF/S with adaptive copy initially
Answer: B
EMC E20-816 E20-816 E20-816인증
NO.7 What are the key differences between SIRT in 5772 and SIRT in Symmetrix V-Max with 5874?
A. SIRT in 5874 is enabled for all write sizes or if RTT > 115 microsec
B. SIRT in 5874 is enabled for write sizes up to 64 KB or RTT threshold > 520 microsec
C. SIRT in 5874 is enabled for all write sizes or if RTT < 115 microsec
D. SIRT in 5874 is enabled for write sizes up to 128 KB or if RTT < 115 microsec
Answer: A
EMC인증 E20-816 E20-816덤프 E20-816
NO.8 Click the Calculator icon in the upper left-hand corner.
SRDF/S over Fibre Channel has been configured between two V-Max arrays that are 50 kilometers apart.
What is the expected write response time delay due to latency?
A. 0.25 ms
B. 0.5 ms
C. 1 ms
D. 2 ms
Answer: C
EMC덤프 E20-816시험문제 E20-816 E20-816자료 E20-816기출문제 E20-816기출문제
NO.9 The customer has a DMX-4 replicating to another DMX-4 (microcode level 5773 for both) over an
SRDF/S session between two sites 20 km apart and wants to understand the limitation (if any) of using
the Single Round Trip (SiRT) feature on RF directors. What is the applicable limitation of the setup?
A. SiRT only works for an I/O size of less than 32 KB.
B. SiRT is enabled for all block sizes.
C. SiRT would not work because the distance is greater than 12 km.
D. SiRT only works for SRDF/A.
Answer: A
EMC E20-816 E20-816 E20-816덤프 E20-816 E20-816최신덤프
NO.10 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes with a 16-hour RPO.
How should the Change Tracker data collection be set up to model the solution.?
A. Delta report with a reset of 8 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Sum report with a reset of 8 hours
Answer: B
EMC dumps E20-816 E20-816 dump E20-816 pdf E20-816
NO.11 A company has a Symmetrix V-Max array in an open systems environment. They want to use
TimeFinder/Snap to create a single copy per day of a production environment containing 200 volumes of
8 GB each. Twenty-five percent of the total I/O in the application is write activity.
What is the amount of physical storage required for all VDEVs?
A. 50 GB
B. 4 GB
C. 8 GB
D. 0 GB
Answer: D
EMC E20-816 E20-816 E20-816 dump E20-816최신덤프
NO.12 A customer has a single V-Max and you are helping to design a new SRDF solution. This customer
wants to replicate all its data with SRDF over a Gigabit Ethernet.
In order to get the maximum benefit from scaling, what is the most important consideration?
A. All GigE ports on the source should be able to see all GigE ports on the target array
B. Ports must have auto-negotiation off because we don't support Jumbo Frames
C. Speed limit value in the Symmetrix configuration file (not persistent)
D. Speed limits can be set on GigE ports from 100 to 10000 Mb (megabits)
Answer: A
EMC인증 E20-816 E20-816 dumps
NO.13 The customer wants to replace the three DMX 2000s with a single Symmetrix V-Max using Open
Replicator hot pull for the move. What sequence of steps should be taken to get ready for the copy
sessions?
LUN Masking of DMX 2000 remote volumes to the V-Max FA ports.
V-Max and DMX 2000 arrays are reachable via the same fabric or SAN extension.
FA ports of V-Max are zoned to FA ports of the three DMX 2000s.
V-Max and DMX 2000 arrays are reachable via point-to-point or FC-AL.
LUN Masking of the V-Max control volumes to the DMX 2000 FA ports.
All V-Max FAs have access to the DMX 2000 volumes being migrated.
A. 4,6,1,3
B. 4,3,5,6
C. 2,3,1,6
D. 2,3,5,6
Answer: C
EMC pdf E20-816최신덤프 E20-816기출문제
NO.14 A customer is running SRDF/A single session mode. They want to change into SRDF/S mode after
nightly periods of high write activity have completed. The switch to synchronous mode failed.
What is a potential cause for this failure?
A. SRDF/S cycle switching feature is not enabled.
B. Mode change feature is only supported with Concurrent SRDF.
C. SDRF/A write cache is not enabled at the remote site.
D. Fifty percent or more of SRDF/A write cache is in use on the target Symmetrix.
Answer: D
EMC dumps E20-816최신덤프 E20-816 E20-816 E20-816 dump
NO.15 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes. The snap would be kept for 8 hours. How should the Change Tracker data
collection be set up to model the solution?
A. Sum report with a reset of 4 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Delta report with a reset of 8 hours
Answer: D
EMC E20-816덤프 E20-816 dump E20-816 E20-816
ITexamdump의 70-688덤프의 VCE테스트프로그램과 ST0-202덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-321시험에 대비한 고품질 덤프와 ACMA_6.1시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B104시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기