2014년 1월 19일 일요일

Juniper JN0-380 덤프데모

ITExamDump는Juniper JN0-380인증시험의 촉매제 같은 사이트입니다.Juniper JN0-380인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Juniper JN0-380인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Juniper JN0-380덤프자료가 많은 도움이 될 것입니다.

ITExamDump는 여러분의 요구를 만족시켜드리는 사이트입니다. 많은 분들이 우리사이트의 it인증덤프를 사용함으로 관련it시험을 안전하게 패스를 하였습니다. 이니 우리 ITExamDump사이트의 단골이 되었죠. ITExamDump에서는 최신의Juniper JN0-380자료를 제공하며 여러분의Juniper JN0-380인증시험에 많은 도움이 될 것입니다.

이 글을 보시게 된다면Juniper인증 JN0-380시험패스를 꿈꾸고 있는 분이라고 믿습니다. Juniper인증 JN0-380시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의Juniper인증 JN0-380덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의Juniper인증 JN0-380덤프는 고객님께서 Juniper인증 JN0-380시험을 패스하는 필수품입니다.

시험 번호/코드: JN0-380
시험 이름: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-01-18

Juniper인증JN0-380시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로Juniper인증JN0-380시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도Juniper인증JN0-380시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.Juniper인증JN0-380시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.

IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Juniper인증 JN0-380시험에 도전하는 분이 많은데 ITExamDump에서 Juniper인증 JN0-380시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.

JN0-380 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-380.html

NO.1 What is the maximum allowed configurable SSIDs per radio?
A. 8
B. 16
C. 32
D. 64
Answer: C

Juniper   JN0-380   JN0-380   JN0-380

NO.2 You have installed your AP in the proper location on your network. The AP needs to obtain
configuration information from a controller before it can support wireless clients.
What are three methods that an AP uses to do this? (Choose three.)
A. ICMP ping
B. Keepalive packets
C. DNS Lookup
D. L2 Broadcast
E. DHCP Option 43
Answer: C,D,E

Juniper시험문제   JN0-380   JN0-380   JN0-380   JN0-380

NO.3 Which Juniper Networks WLA model supports spectrum analysis?
A. WLA371
B. WLA422
C. WLA532
D. WLA632
Answer: C

Juniper기출문제   JN0-380   JN0-380   JN0-380자료

NO.4 A user repeatedly calls in to the Help desk complaining about their wireless connection.
Which actions would test the user's wireless connectivity from RingMaster?
A. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the Location History option to find out if the client is near a functioning access point.
B. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the RF ping test to determine RSSI and retry counts to verify the RF environment being
reported by the AP to which the client is connected.
C. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
choose to terminate the client from the wireless network so they can reestablish a new session.
D. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
add the client to the Watched Client list to gather additional data on the clients signal strength and
data throughput.
Answer: B

Juniper dump   JN0-380   JN0-380 pdf   JN0-380 pdf

NO.5 What is the hardware requirement for a RingMaster client?
A. Intel/AMD x86-compatible dual core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
B. Intel/AMD x86-compatible single core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
C. Intel/AMD x86-compatible single core processor, 2.0Ghz, 1GB RAM, 1024 MB HD space
D. Intel/AMD x86-compatible dual core processor, 1.0Ghz, 1GB RAM, 512 MB HD space
Answer: A

Juniper pdf   JN0-380   JN0-380자료
6. During the installation of RingMaster, you receive the installation error: "HTTPS Server port is
already in use. Please select another port."
What should you do to resolve this issue?
A. Change the HTTPS Server port number to 443.
B. Change the HTTPS Server port number so that it does not conflict with other applications.
C. Restart the installation process so that RingMaster can resolve the issue.
D. Change the SNMP Trap Receiver port to 162.
Answer: B

Juniper최신덤프   JN0-380   JN0-380인증
7. You are asked to troubleshoot a communication problem between a WLC and a RADIUS server.
You verified that the RADIUS server is reachable from the WLC.
Which WLC CLI command would be used for troubleshooting RADIUS connectivity?
A. rfping
B. show authentication
C. ping
D. radping
Answer: D

Juniper   JN0-380   JN0-380자격증
8. In an auditorium, you have 200 wireless clients connecting to the wireless network. You want
to
configure RF load balancing to distribute client sessions across multiple APs in the area.
Which two parameters are configurable to achieve this? (Choose two.)
A. setting strictness
B. configuring auto-tune
C. defining transmit rates
D. setting band preference
Answer: A,D

Juniper   JN0-380덤프   JN0-380 dumps
9. You want to provide secure wireless services to one set of clients on your network and allow
open
access services to your guest clients. You need to configure service profiles for each type of
access to the network.
Which three methods are used to accomplish this? (Choose three.)
A. Configure one service per WLA.
B. Configure an encryption type.
C. Configure IP addresses.
D. Configure SSIDs.
E. Configure VLANs.
Answer: B,D,E

Juniper덤프   JN0-380 dump   JN0-380
10. Multiple users are complaining that their wireless connections are not working.
Which RingMaster screen would the administrator use for troubleshooting?
A. Alarms
B. Clients
C. Monitor
D. Verification
Answer: C

Juniper dumps   JN0-380   JN0-380   JN0-380인증

ITexamdump의 CAT-440덤프의 VCE테스트프로그램과 EN0-001덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-061시험에 대비한 고품질 덤프와 70-488시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-597시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-380.html

댓글 없음:

댓글 쓰기