Microsoft인증 070-659시험은 등록하였는데 시험준비는 아직이라구요? Microsoft인증 070-659시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Microsoft인증 070-659덤프와의 근사한 만남이Microsoft인증 070-659패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Microsoft인증 070-659덤프로 시험패스에 고고싱하세요.
이 글을 보시게 된다면Microsoft인증 070-659시험패스를 꿈꾸고 있는 분이라고 믿습니다. Microsoft인증 070-659시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의Microsoft인증 070-659덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의Microsoft인증 070-659덤프는 고객님께서 Microsoft인증 070-659시험을 패스하는 필수품입니다.
Microsoft인증070-659시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Microsoft인증070-659시험패스로 꿈을 이루어주는 사이트입니다. 우리는Microsoft인증070-659시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Microsoft인증070-659시험을 응시할 수 있는 자료입니다.
070-659는Microsoft의 인증시험입니다.070-659인증시험을 패스하면Microsoft인증과 한 발작 더 내디딘 것입니다. 때문에070-659시험의 인기는 날마다 더해갑니다.070-659시험에 응시하는 분들도 날마다 더 많아지고 있습니다. 하지만070-659시험의 통과 율은 아주 낮습니다.070-659인증시험준비중인 여러분은 어떤 자료를 준비하였나요?
Microsoft인증070-659시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Microsoft인증070-659시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.
IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의Microsoft인증 070-659덤프로 시험준비를 시작하면 성공에 가까워집니다. Microsoft인증 070-659덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. Microsoft인증 070-659덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의Microsoft인증 070-659덤프를 공부하여 자격증을 땁시다.
시험 번호/코드: 070-659
시험 이름: Microsoft (TS: Windows Server 2008 R2, Server Virtualization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 145 문항
업데이트: 2014-02-23
ITExamDump는 여러분이 원하는 최신 최고버전의 Microsoft 인증070-659덤프를 제공합니다. Microsoft 인증070-659덤프는 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들로 만들어졌습니다. ITExamDump의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%합격율을 자랑하며 ITExamDump의 제품을 구매하였다면 Microsoft 인증070-659시험패스와 자격증 취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
070-659 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-659.html
NO.1 You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of several virtual machines (VMs).
In VMM, you need to configure the default placement options to consolidate the VMs on the fewest
possible host servers.
What should you do?
A. In the Convert Virtual Machine (V2V) Wizard, set the placement goal to Resource maximization.
B. In Administration view, set the placement goal to Resource maximization.
C. In Administration view, set the placement goal to Load balancing.
D. In the Convert virtual Machine (V2V) Wizard, set the placement goal to Load balancing.
Answer: B
Microsoft dumps 070-659최신덤프 070-659 070-659자료 070-659
NO.2 You are configuring a Windows Server 2008 R2 Hyper-V server.
You need to audit changes to Hyper-V roles and authorization rights.
Which file should you audit?
A. AzMan.msc
B. web.config
C. InitialStore.xml
D. machine.config
Answer: C
Microsoft 070-659 070-659최신덤프 070-659자격증 070-659
NO.3 A company has a 64-bit server with a quad-core processor. The server runs Windows Hyper-v Server
2008 R2 Service pack(SP) 1. The server will host five virtual machines (VMs) with SP1 integration
services installed. VM1, VM2, and VM3 use the maximum number of logical processors. Resources
allocation for VMs is configured as shown in the following table.
The environment must be configured to meet the following resource allocation requirements:
- VM4 must be able to consume up to half of each processor
- VM5 must not start if VM1, VM2, VM3, and VM4 are running.
- VM4 must use the maximum number of logical processors available on the Hyper-V host
- VM4 must share CPU resources evenly with VM3 during peak usage on the Hyper-V host
You need to configure VM4 to meet the requirements.
How should you configure VM4? (To answer, drag the approbate setting from the list of choices to the
correct locations in the answer area.)
Answer:
NO.4 A company has a server that runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
with Service Pack (SP) 1 and Windows Server 2008 R2 Enterprise with Hyper-V.
The company is preparing to deploy virtual machines (VMs) from templates and has the following
requirements:
- The templates must be created from virtual hard disks (VHDs).
- The templates must include Windows 7.
- An out of the box experience (OOBE) must be provided for all guest operating systems that are
deployed from the templates.
You need to create a template that meets the company requirements.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.5 You have a stand-alone server named SERVER01 that runs Windows Server 2008 R2 Enterprise with
service Pack l and Hyper-V. The server hosts 12 virtual machines (VMs). You add Hyper-V on a new
server named SERVER02. SERVER02 runs Windows Server 2008 R2 Enterprise. One of the VMs on
SERVER01 is configured to use dynamic memory. You export the VM.
The VM cannot be imported on SERVER02. You prepare to export the VM again.
You need to ensure that the exported VM can be imported on SERVER02.
What should you do?
A. Remove all DVD drive media from the VM.
B. Configure the VM to use static memory.
C. Start the VM and allow it to run.
D. Start and then pause the VM.
Answer: B
Microsoft시험문제 070-659 070-659 dumps 070-659기출문제 070-659기출문제
NO.6 You use Hyper-V Server 2008 R2 and failover clustering to host several virtual machines (VMs).
You need to place a disk in maintenance mode.
Which Windows PowerShell cmdlet should you run?
A. Suspend-ClusterResource
B. Stop-ClusterResource
C. Set-ClusterResourceDependency
D. Block- ClusterAccess
Answer: A
Microsoft시험문제 070-659 070-659덤프
NO.7 Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security
group named Development.
You have a member server that runs Windows Server 2008 R2 with the Hyper-V role installed.
You need to ensure that Development group members can only manage virtual machines (VMs).
Development group members must not have administrative privileges on the host server.
What should you use.?
A. Authorization Manager
B. the net localgroup command
C. Local Users and Groups
D. Active Directory Administrative Center
Answer: A
Microsoft최신덤프 070-659 pdf 070-659 070-659
NO.8 Your environment includes Hyper-V and VMware ESX. You manage your virtual environment by using
Microsoft System Center Virtual Machine manager (VMM) 2008 R2.
You plan to perform a virtual-to-virtual (V2V) conversion of a virtual machine (VM) that is located on the
ESX server.
You start the conversion by using the Convert Virtual Machine Wizard.
Communication between the destination host and the ESX server fails, and the conversion does not finish
successfully.
You need to ensure that the conversion finishes successfully.
What should you change?
A. WSMan permissions and settings
B. Windows Firewall exceptions for Background Intelligent Transfer Service (BITS)
C. Secure Shell (SSH) and HTTPS settings
D. Server Message Block (SMB) settings
Answer: C
Microsoft dump 070-659자료 070-659 070-659 070-659 pdf
NO.9 A company's virtualization environment contains servers that run Windows Server 2008 R2 with
Hyper-V and other servers that run VMware. You manage the Hyper-V environment by using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 SP1. You manage the VMware vSphere 4
environment by using VMware vCenter.
You need to manage the VMware hosts by using VMM.
What should you do?
A. Add the vCenter server to VMM.
B. Move the VMware host to a host group.
C. Add a Library Server to VMM.
D. Perform a virtual-to-virtual (V2V) migration of the VMware VMs
Answer: A
Microsoft 070-659 070-659 dump 070-659 dump
NO.10 A company has virtual machine (VMs) running in a 16-node Hyper-V cluster. They are using Microsoft
System Center Virtual Machine Manager (VMM) 2008 R2 to migrate all of their existing VMware VMs to
Hyper-V.
You need to configure VMM to ensure that it places VMs on each host until each host is fully utilized.
What should you do?
A. Configure placement settings for resource maximization.
B. Prioritize resources for memory free.
C. Prioritize resources for disk I/O.
D. Prioritize resources for network utilization.
E. Configure placement settings for load balancing.
Answer: AE
Microsoft dumps 070-659인증 070-659덤프
NO.11 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V
environment.
Failures occur when you perform offline physical-to-virtual (P2V) conversions by using VMM.
You need to ensure that you have the information that is necessary to troubleshoot the problem.
What should you do?
A. Create the x:\Windows\inf\setupapi.dev.log file in Windows PE.
B. Create the scvmm_winpe.etl file on the root of the source computers boot volume
C. Create the scvmm_winpe_setupapi.log file on the root of the source computers boot volume
D. Create the scvmm_enable_winpe_tracing.txt file on the root of the source computers boot volume
Answer: D
Microsoft 070-659 dump 070-659덤프 070-659 dumps 070-659 dumps
NO.12 You manage Hyper-V host servers and virtual machines (VMs) by using Microsoft System Center Virtual
Machine Manager (VMM) 2008 R2. You grant a user the Delegated Administrator user role.
You need to provide the user with the ability to manage VMs through the VMM Self-Service Portal.
What should you do?
A. In VMM, grant the user the Administrator user role.
B. In VMM, grant the user the Self-Service user role.
C. Enable the Single sign-on for Terminal Services option for the VMM Self-Service Portal.
D. Enable the Integrated Windows Authentication option for the VMM Self-Service Portal.
Answer: B
Microsoft시험문제 070-659최신덤프 070-659자격증 070-659덤프 070-659
NO.13 You manage your virtual environment by using Microsoft System Center Virtual Machine Manager
(VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager
2007 R2.
You need to enable automatic migration between Hyper-V host servers.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a host group and add the host servers to it.
B. Configure reserve resources on each host server.
C. Use Intelligent Placement to place VMs on the host servers that have the highest rating.
D. Configure Performance and Resource Optimization (PRO) Tips.
Answer: CD
Microsoft 070-659 pdf 070-659 070-659시험문제
NO.14 A company has a Windows Hyper-V Server 2008 R2 failover cluster.
You need to perform a configuration-only export of a virtual machine (VM).
What should you do?
A. In Hyper-V Manager, right-click the VM and select Export.
B. In Hyper-V Manager, rename the VM.
C. Create a custom .exp file with the VM name.
D. Create a PowerShell script that uses the Hyper-V API.
Answer: D
Microsoft 070-659기출문제 070-659시험문제 070-659
NO.15 You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your
Hyper-Venvironment.
The finance department uses a legacy application that is not supported on Windows Server 2008 R2. The
application runs on a server that has the following configuration:
- Windows 2000 Server operating system
- One 10GB hard disk, FAT formatted
- 512 MB of RAM
You need to ensure that you can perform a physical-to-virtual (P2V) conversion of the server.
What should you do?
A. Run the convert c: /FS: NTFS command on the server.
B. Use offline P2V.
C. Increase the server's RAM to at least 1024 MB.
D. Use online P2V.
Answer: B
Microsoft최신덤프 070-659 070-659시험문제 070-659
NO.16 A company has a physical Windows 2008 R2 Server that they plan to migrate to a virtual machine
(VM).
You need to document the migration process.
How should you complete the diagram? (To answer drag the appropriate answers from th elist of answer
choices to the correct locations in the diagram (answer area).
Answer:
NO.17 You use Hyper-V server 2008 R2 and failover clustering to host several virtual machines (VMs).
You plan to perform a Volume Shadow Copy (VSS) backup of a Cluster Shared Volume (CSV).
You need to ensure that resources can continue to use the CSV during the VSS backup.
What should you do?
A. Turn on maintenance mode for the CSV.
B. Configure your VSS-aware backup utility as a generic application in failover clustering.
C. Use Failover Cluster Manager to remove dependences from your disk resources.
D. Turn on redirected access for the CSV.
Answer: D
Microsoft시험문제 070-659 070-659 070-659
NO.18 You are configuring a virtual environment. The environment includes servers that run either Windows
Server 2003 or Windows Server 2008 R2. You manage the environment by using Microsoft System
Center Virtual Machine Manager (VMM) 2008 R2.
The servers that run Windows Server 2003 do not meet the system requirements to run Windows Server
2008 R2 or Microsoft Hyper-V Server 2008 R2.
You want to host non-production virtual machines (VMS) on the Windows Server 2003 servers.
You need to be able to manage the Windows Server 2003 servers by using VMM.
What should you do?
A. Install Virtual Machine Remote Control Client Plus (VMRCplus) on the Windows Server 2003 host
servers.
B. Stage the Microsoft Virtual Server 2005 R2 software on the VMM server.
C. Stage the Microsoft Virtual Server 2005 software on the VMM server.
D. Add the Windows Server 2003 host servers to VMM by using the Add Hosts wizard.
Answer: D
Microsoft 070-659 070-659
NO.19 A company has a Hyper-V server named SERVER01 that runs Windows Server 2008 R2 Enterprise
with Service Pack (SP) 1. All virtual machines (VMs) run Windows Server 2008 R2 Enterprise with SP1.
All VMs are configured to use Dynamic Memory.
A VM named VM01 is exhibiting performance problems.
You need to ascertain how much memory VM01 is consuming.
What should you do?
A. Use Performance Monitor to view the \Hyper-V Dynamic Memory Balancer\Available Memory
performance counter for SERVER01.
B. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Guest Visible Dynamic Memory
performance counter for VM01.
C. In the VM settings, view the Maximum RAM value.
D. Use Performance Monitor to view the \Hyper-V Dynamic Memory VM\Physical Memory performance
counter for VM01.
Answer: A
Microsoft 070-659 070-659 070-659시험문제
NO.20 A company uses Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage their
Hyper-V environment.
A VMM hardware profile is required for the new SQL Server 2008 R2 Enterprise VMs. Based on company
policy, VMs running SQL Server 2008 R2 Enterprise must use Dynamic Memory and the memory
allocation for the VMs must be set to high.
You need to configure a VMM hardware profile so that the memory allocation priority is set to high.
How should you configure the hardware profile? (To answer, select the appropriate node in the answer
area.)
Answer:
ITexamdump의 PMI-100덤프의 VCE테스트프로그램과 000-784덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-588시험에 대비한 고품질 덤프와 200-120시험 최신버전덤프를 제공해드립니다. 최고품질 74-343시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기