ITExamDump 에서 출시한 IBM인증000-732시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한IBM인증000-732덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.
ITExamDump의 IBM 000-732덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 IBM 000-732덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.
IT인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다. 승진을 위해서나 연봉협상을 위해서나 자격증 취득은 지금시대의 필수입니다. ITExamDump의IBM인증 000-732덤프는 회사다니느라 바쁜 나날을 보내고 있는 분들을 위해 준비한 시험준비공부자료입니다. ITExamDump의IBM인증 000-732덤프를 구매하여 pdf버전을 공부하고 소프트웨어버전으로 시험환경을 익혀 시험보는게 두렵지 않게 해드립니다. 문제가 적고 가격이 저렴해 누구나 부담없이 애용 가능합니다. ITExamDump의IBM인증 000-732덤프를 데려가 주시면 기적을 안겨드릴게요.
IBM인증 000-732시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의IBM인증 000-732덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의IBM인증 000-732덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-732시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.
ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.
시험 번호/코드: 000-732
시험 이름: IBM (DB2 9 for z/OS Database Administrator)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 148 문항
업데이트: 2013-09-15
000-732 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-732.html
NO.1 An end-user indicates that the DRDA client application accessing DB2 for z/OS is very slow.
However, other local applications accessing the same tables are running fine. What would
indicate that this could be a DB2 problem?
A.Calculate the non-nested CLASS 1 CPU time minus non-nested CLASS 2 CPU time. If the value is high,
it suggests a problem in the DDF address space.
B.Investigate the CLASS 3 suspension time. As class 3 time includes the time that DB2 spends
sending/receiving network messages, a high value is a possible indication that the network is
experiencing a slow-down.
C.Calculate the non-nested CLASS 1 Elapsed time (ET) minus non-nested CLASS 2 ET. If the value is
high, this can only be caused by spending most time in the application, and therefore the application
should be investigated.
D.Check to see if the DB2 remote connection can become inactive at commit (Type 2 inactive). If not, this
leads to a high non-nested CLASS 1 ET and is likely the cause of the performance problem. Inactive
connections will use less CPU than threads that stay active all the time.
Correct:A
IBM 000-732 dump 000-732 000-732
NO.2 Which parameter in WLM Application Environment controls the # of concurrent stored
procedures that can run in that particular environment?
A.NUMSRB
B.NUMTHR
C.NUMCTK
D.NUMTCB
Correct:D
IBM 000-732 dump 000-732 000-732
NO.3 A DBA has been required by a new company policy to implement a new DB2 security method.
The company would like to separate the authorization IDs that can execute plans and packages
from the authorization IDs that can create new plans and packages. Which of the following explicit
system privileges allows the user to create new plans and packages without being able to also
execute them?
A.BINDADD
B.CREATEIN
C.BINDAGENT
D.CREATEDBA
Correct:C
IBM 000-732 dump 000-732 000-732
NO.4 If an object is created statically by a role within a trusted context and the ROLE AS OBJECT
OWNER clause is specified, who becomes the object owner when executing the package?
A.The role
B.The schema name
C.The owner keyword
D.The current SQLID (if set)
Correct:A
IBM 000-732 dump 000-732 000-732
NO.5 A DB2 V9 system that is in New Function Mode:
A.cannot fall back.
B.can fall back to Compatibility Mode.
C.can fall back to New Function Mode*.
D.can fall back to Compatibility Mode*.
Correct:D
IBM 000-732 dump 000-732 000-732
NO.6 A DBA needs to use the DSN command processor to delete DB2 packages that are no longer
needed. Which of the following choices is correct for the DBA to use?
A.SPUFI or QMF with the DROP statement
B.FREE Package (..)
C.DROP Package (..)
D.DROP PLAN () PKLIST (..)
Correct:B
IBM 000-732 dump 000-732 000-732
NO.7 An application has been running in production for a long time. The size of the objects involved
has not changed, but the application is running much slower than in the beginning. When should
the DBA consider manually REBINDing the application?
A.After REORGing the objects with inline statistics.
B.When dynamic SQL is used, but only after REORG and RUNSTATS has been performed.
C.Actually it is NOT recommended to perform manual rebinds but rather have DB2 perform automatic
rebinds.
D.If the size of the objects has not changed after gathering RUNSTATS data, the access path is very
unlikely to change, and therefore no REBIND is needed.
Correct:A
IBM 000-732 dump 000-732 000-732
NO.8 A company uses TRUSTED CONTEXT "ERP1" and ROLE "ERP_ROLE" as a security mechanism
to limit security exposure for an application. All the DB2 objects (databases, table spaces, tables,
indexes, views, plans and packages) have been created by that ROLE. The ROLE "ERP_ROLE"
has been assigned to User ID "DBA01" in order to perform DBA related tasks. When the user
"DBA01" leaves the company, the authorization ID is removed. Which of the following statements
are correct? (Select two answers)
A.None of these DB2 objects need to be recreated to re-grant the privileges.
B.The related plans and packages have to be recreated and the privileges re-granted.
C.When removing user "DBA01" privileges, none of these DB2 objects need to be dropped.
D.Only the related databases, table spaces, tables, indexes and views need to be recreated and the
privileges re-granted.
E.To remove the privileges of user "DBA01" on these related plans and packages, they have to be
dropped and as a result all associated privileges are revoked.
Correct:A C
IBM 000-732 dump 000-732 000-732
NO.9 There are dynamic SQL statements running in a subsystem that need to have their host
variables reoptimized at run-time, however the distribution of the values does not change very
much between execution. What is the most optimal bind parameter for these statements?
A.REOPT(NONE)
B.REOPT(ONCE)
C.REOPT(VARS)
D.REOPT(ALWAYS)
Correct:B
IBM 000-732 dump 000-732 000-732
NO.10 At which of the following times is the access control authorization routine (DSNX@XAC)
invoked?
A.At DB2 startup.
B.When executing a DB2 GRANT statement.
C.When DB2 has cached authorization information.
D.During any authorization check if NO was specified in the USE PROTECTION field of the DSNTIPP
panel.
Correct:A
IBM 000-732 dump 000-732 000-732
NO.11 Which statement best describes how multi-row fetch improves performance?
A.It reduces the amount of programming required.
B.It reduces the number of SQL statements issued.
C.It reduces the amount of data sent over a network.
D.It reduces the amount of I/O required to read a table.
Correct:B
IBM 000-732 dump 000-732 000-732
NO.12 What is the purpose of the following catalog health query? SELECT BNAME, BCREATOR,
BTYPE, DNAME FROM SYSIBM.SYSPLANDEP PD WHERE BTYPE IN ('T', 'V', 'A') AND NOT EXISTS
(SELECT * FROM SYSIBM.SYSTABLES WHERE CREATOR = PD.BCREATOR AND NAME =
PD.BNAME AND TYPE = PD.BTYPE);
A.For every row in SYSTABLES that indicates a dependency upon a table, view, or alias, there should be
a corresponding row in SYSPLANDEP.
B.For every row in SYSPLANDEP that indicates a dependency upon a table, view, or alias, there should
be a corresponding row in SYSTABLES.
C.For every row in SYSPLANDEP that indicates a dependency upon a table space, view, or a table that
has been altered, there should be a corresponding row in SYSTABLES.
D.For every row in SYSPLANDEP that indicates a dependency upon a table space, a table with a
VARCHAR column, or alias, there should be a corresponding row in SYSTABLES.
Correct:B
IBM 000-732 dump 000-732 000-732
NO.13 Which of the following is the correct configuration in a two way DB2 datasharing group?
A.MVSA (DB2A, active log A, workfile A) MVSB (DB2B, active log B, workfile B) Shared BSDS and
catalog and directory Coupling facility one Sysplex timer one
B.MVSA (DB2A, BSDS A, active log A, workfile A) MVSB (DB2B, BSDS B, active Log B, workfile B)
Shared catalog and directory Coupling facility one Sysplex timer one
C.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log A, workfile A, catalog & directory B) Coupling facility one Sysplex timer one
D.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log B, workfile B, catalog & directory B) Coupling facility one Sysplex timer one
Correct:B
IBM 000-732 dump 000-732 000-732
NO.14 A DBA was examining the Log Statistics, Log Activity section in the OMEGAMON Performance
Expert Tool and noticed a large value in the field UNAVAILABLE OUTPUT LOG BUFF. This is an
important and critical performance metric. What does this performance metric mean?
A.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too large so memory was not
utilized and wasted.
B.The active logs were not stripped by DFSMS and the active log data sets have to be processed
sequentially so many times.
C.The active log data sets were not placed on different volumes to reduce contention so a large amount of
I/O activity showed up in the OUTPUT BUFFER field.
D.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too small so application has to
wait while DB2 was busy writing the Active log data sets.
Correct:D
IBM 000-732 dump 000-732 000-732
NO.15 Which of the following buffer pool thresholds CANNOT be changed by the DBA?
A.Deferred write threshold (DWQT)
B.Immediate write threshold (IWTH)
C.Vertical deferred write threshold (VDWQT)
D.Virtual buffer pool assisting parallel sequential threshold (VPXPSEQT)
Correct:B
IBM 000-732 dump 000-732 000-732
NO.16 Given the following RUNSTATS utility statement: RUNSTATS TABLESPACE
DB2CERTDB.MYTBLSPC1 TABLE (MYTABLE1) COLUMN(ALL) INDEX REPORT YES UPDATE ALL
HISTORY ALL which of the following statements is true?
A.Cardinality statistics will only be collected on all columns of all indexes on table MYTABLE1.
B.Cardinality statistics will only be collected on the first column of each index on table MYTABLE1.
C.Cardinality statistics will only be collected on all columns of each index associated with table space
MYTBLSPC1.
D.Cardinality statistics will only be collected on the first column of each index associated with table space
MYTBLSPC1.
Correct:D
IBM 000-732 dump 000-732 000-732
NO.17 A DBA wishes to audit all access to the non-audited table OWNER.EMPLOYEE. Assuming no
audit traces are started, which of the following steps are needed to audit access to this table?
A.-START TRACE AUDIT CLASS (5)
B.-START TRACE AUDIT CLASS (4, 5)
C.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE AUDIT ALL
D.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE DATA CAPTURE
CHANGES
Correct:C
IBM 000-732 dump 000-732 000-732
NO.18 Which of the following DSNZPARMs is necessary to influence access path selection for certain
queries?
A.STDSQL
B.OPTHINTS
C.PARTKEYU
D.DESCSTAT
Correct:B
IBM 000-732 dump 000-732 000-732
NO.19 Which of the following RACF profiles would be used to allow IMS to access DB2 DSN1?
A.DSN1.IMS
B.DSNR.IMS
C.DSN1.MASS
D.DSN1.SASS
Correct:C
IBM 000-732 dump 000-732 000-732
NO.20 An audit trace shows that TSO user TSOID1, with DBADM authority, is continually attempting to
update a table in DB2 subsystem DSN1 that is not supposed to be updated. Which of the following
will prevent access to the DB2 subsystem?
A.REVOKE DBADM FROM TSOID1
B.Change TSOID1's access to DSNR resource class DSN1.TSO to NONE
C.Change TSOID1's access to DSNR resource class DSN1.BATCH to READ
D.Change TSOID1's access to DSNR resource class DSN1.BATCH to NONE
Correct:D
IBM 000-732 dump 000-732 000-732
ITexamdump의 EX0-118덤프의 VCE테스트프로그램과 HH0-240덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-380시험에 대비한 고품질 덤프와 LOT-404시험 최신버전덤프를 제공해드립니다. 최고품질 70-687시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기