여러분은 아직도Microsoft 70-683인증시험의 난이도에 대하여 고민 중입니까? 아직도Microsoft 70-683시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
우선 우리ITExamDump 사이트에서Microsoft 70-683관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Microsoft 70-683덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.
ITExamDump는 유일하게 여러분이 원하는Microsoft인증70-683시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.
네트워크 전성기에 있는 지금 인터넷에서Microsoft 인증70-683시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Microsoft 인증70-683시험을 한방에 통과하도록 도와드립니다.
70-683인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의70-683인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에70-683인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.
시험 번호/코드: 70-683
시험 이름: Microsoft (TS: Windows 7, Preinstalling for OEMs )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 87 문항
업데이트: 2013-09-29
ITExamDump 의 Microsoft인증 70-683덤프는Microsoft인증 70-683시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Microsoft인증 70-683시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Microsoft인증 70-683시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.
70-683 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-683.html
NO.1 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D
Microsoft 70-683 dump 70-683자격증 70-683
NO.2 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C
Microsoft 70-683 dumps 70-683최신덤프 70-683
NO.3 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D
Microsoft dump 70-683 70-683 70-683
NO.4 You have Windows Image (WIM) file that contains an image of Windows 7. You plan to deploy the
image to computers that have a third-party hardware component. The device driver for the hardware
component can only be installed by using an executable provided by the hardware vendor. You need to
ensure that the device driver is installed when you deploy the image. What should you do first?
A.On a reference computer, run Drvload.exe.
B.On a reference computer, run Imagex.exe and specify the /apply parameter.
C.On a technicians computer, run Imagex.exe and specify the /mount parameter.
D.On a technicians computer, run Dism.exe and specify the /add-driver parameter.
Answer: B
Microsoft기출문제 70-683덤프 70-683 70-683
NO.5 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B
Microsoft자료 70-683 70-683 70-683
NO.6 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B
Microsoft자료 70-683자격증 70-683 70-683자료 70-683최신덤프
NO.7 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B
Microsoft 70-683자격증 70-683 pdf 70-683 70-683자격증 70-683
NO.8 You have a Windows Image (WIM) file named Image.wim that contains a Windows 7 image. The
default compression settings were used when creating the WIM file. You create a new image. You need to
ensure that both images are stored by using maximum compression. What should you do?
A.Append the new image to Image.wim.
B.Export the existing image, and then append the new image to Image.wim.
C.Run Compact.exe and specify the /c parameter. Run Dism.exe and specify the /remount-WIM
parameter.
D.Run Imagex.exe and specify the /mountrw parameter. Run Dism.exe and specify the /cleanup-WIM
parameter.
Answer: B
Microsoft dumps 70-683 70-683 dump 70-683덤프 70-683 dumps 70-683
NO.9 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D
Microsoft최신덤프 70-683 70-683 70-683 70-683
NO.10 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C
Microsoft dumps 70-683자격증 70-683덤프 70-683
ITexamdump의 SY0-301덤프의 VCE테스트프로그램과 LOT-441덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-478시험에 대비한 고품질 덤프와 CAT-500시험 최신버전덤프를 제공해드립니다. 최고품질 74-343시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기